Boky Torolalana ho an'ny Tariby Audio Movo MC1 3.5mm

1. Fampidirana

This manual provides instructions for the Movo MC1 3.5mm Audio Cable. This cable is designed to facilitate audio connections between various devices, ensuring clear and reliable sound transmission for a range of applications, including audio recording and playback.

2. Toetran'ny vokatra

• Dual Male TRS Stereo Output Connectors: Equipped with two 3.5mm TRS (Tip-Ring-Sleeve) male connectors, ideal for stereo audio or balanced mono connections.
• Fifanarahana iraisam-pirenena: Designed to connect audio mixers and microphones to cameras and recorders. It can also function as an auxiliary cable for car speakers and other devices with a 3.5mm audio input.
• 20-inch Coiled Design: The coiled cable extends up to 20 inches when fully expanded, offering flexibility in various setups while remaining compact when not in use.
• Mpampitohy voapetaka volamena: Features gold-plated connectors for enhanced conductivity, impedance-matching, and shielded construction to ensure clear, static-free audio performance.
• Fanorenana avo lenta: Constructed with heavy-duty materials for both the cable and connectors, ensuring maximum durability and reliable performance in diverse environments.

3. Fametrahana sy fifandraisana

The Movo MC1 cable features dual male 3.5mm TRS connectors. Ensure your devices have compatible 3.5mm audio input/output jacks before connecting.

3.1 Connecting to a Camera or Recorder

To connect an external microphone or audio mixer to a camera or recorder:

1. Locate the 3.5mm microphone input jack on your camera or recorder.
2. Connect one end of the Movo MC1 3.5mm TRS cable to the audio output of your microphone or audio mixer.
3. Connect the other end of the Movo MC1 3.5mm TRS cable to the 3.5mm microphone input jack on your camera or recorder.
4. Ensure both connections are secure to prevent audio signal loss.

Figure 1: Movo MC1 3.5mm Audio Cable connected to a camera with an external microphone for recording.

3.2 Connecting to Car Speakers (Auxiliary Input)

To use the Movo MC1 as an auxiliary cable for car speakers:

1. Locate the 3.5mm auxiliary input jack in your car's audio system.
2. Connect one end of the Movo MC1 3.5mm TRS cable to the headphone output or auxiliary output of your audio device (e.g., smartphone, MP3 player).
3. Connect the other end of the Movo MC1 3.5mm TRS cable to the car's auxiliary input jack.
4. Select the auxiliary input source on your car's audio system.

Sary 2: Eksample of Movo MC1 cable connecting a smartphone to a car's audio system for audio playback.

3.3 Understanding TRS Connectors

The Movo MC1 cable utilizes TRS (Tip-Ring-Sleeve) connectors, which are standard for stereo audio or balanced mono audio connections. It is important to use the correct cable type for your devices. TRRS (Tip-Ring-Ring-Sleeve) cables are typically used for devices that combine audio output with a microphone input, such as smartphones with headsets.

4. Torolàlana miasa

Once the Movo MC1 cable is securely connected between your audio source and destination device, ensure both devices are powered on and configured to send/receive audio through the connected 3.5mm jacks. Adjust volume levels on both devices as needed for optimal sound quality. For recording applications, monitor audio levels on your recording device to prevent clipping or distortion.

Figure 3: Movo MC1 cable facilitating audio recording with a smartphone and external microphone.

5. Fikojakojana sy fikarakarana

• Keep the cable clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid sharp bends or kinks in the cable to prevent internal wire damage, which can affect performance.
• Store the coiled cable in a loose, natural coil to maintain its elasticity and prevent stretching or tangling.
• Do not expose the cable to extreme temperatures, direct sunlight, or excessive moisture.
• Handle connectors gently when plugging and unplugging to avoid damage to the pins or the device's audio jacks.

6. Famahana olana

6.1 Tsy misy famoahana feo

• Jereo ny fifandraisana: Ensure both ends of the Movo MC1 cable are fully and securely plugged into the correct audio ports on your devices.
• Haben'ny volume: Verify that the volume on both the audio source and destination devices is turned up and not muted.
• Fikirana fitaovana: Confirm that your devices are configured to use the external audio input/output. For cameras, check microphone input settings. For car audio, ensure the correct auxiliary input is selected.
• Cable Integrity: Inspect the cable for any visible damage, such as cuts or frayed wires. Try using a different cable if available to rule out a faulty cable.
• TRS/TRRS Compatibility: Ensure your devices are compatible with a TRS cable. Some devices may require a TRRS cable for full functionality (e.g., smartphone headsets with microphone).

6.2 Static or Poor Audio Quality

• Fifandraisana azo antoka: Loose connections can cause static or intermittent audio. Re-seat both ends of the cable firmly.
• fitsabahana: Keep the cable away from strong electromagnetic fields or other electronic devices that might cause interference.
• Loharano kalitao: Ensure the audio source itself is producing clear audio. Test with a different audio source if possible.
• Fahasimban'ny tariby: A damaged cable can introduce static or degrade audio quality. Replace the cable if necessary.

7. Famaritana

8. Warranty sy fanohanana

The Movo MC1 3.5mm Audio Cable comes with a Garantie 1 taona. For any technical assistance or support, please contact Movo's US-Based support team. Refer to the product packaging or Movo's official website for the most current contact details and support information.