DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Fampidirana

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Information momba ny fiarovana

Always observe the following safety precautions when installing and operating your loudspeaker:

• Disconnect the vehicle's negative battery terminal before beginning any electrical work to prevent short circuits.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, ampfitaovana elektrika, na ny rafitra herinaratra ao amin'ny fiara.
• Use appropriate gauge wiring for power and speaker connections.
• Mount the speaker securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct vehicle safety features (e.g., airbags).
• Do not operate the audio system at excessively high volumes for prolonged periods, as this can cause hearing damage.
• Miresaha amin'ny mpanao fametrahana matihanina raha misy tsy azonao antoka momba ny ampahany amin'ny dingana fametrahana.

3. Inona no ao anaty boaty

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Boky torolalana

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Famaritana

Sary: Front view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Fametrahana sy fametrahana

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Fanomanana ny fametrahana

• Toerana: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Wiring: Plan the routing of speaker wires from your amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpLifier Matching: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Mametraka ny Speaker

Sary: Side profile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Omano ny tampon-trano: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Mpitondra teny: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Mpandahateny azo antoka: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Fifandraisana tariby

Sary: aoriana view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Fantaro ny terminal: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Connect Wires: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Fifandraisana azo antoka: Ensure all connections are tight and free from short circuits.

6. Torolàlana miasa

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• System Integration: Connect the PRO-GM6 to an appropriate ampfantsona fantsona.
• Fikirana Crossover: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Mahazo fanitsiana: Set ny amplifier gain correctly to match the output voltage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Vanim-potoana fisarahana: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Fikojakojana

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• Fanadiovana: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Fanaraha-maso: Hamarino tsy tapaka raha henjana ny fifandraisan'ny fanamafisam-peo ary ataovy izay tsy hisian'ny tariby rovitra na mibaribary.
• Fiarovana ny tontolo iainana: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

8. Famahana olana

9. Warranty sy fanohanana

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Afaka mahita fampahalalana bebe kokoa sy antsipirian'ny fifandraisana ianao ao amin'ny DS18 Official Store on Amazon.