COMPUTHERM Q7RF Programmable Wireless Room Thermostat User Manual

1. Fampidirana

The COMPUTHERM Q7RF wireless room thermostat is designed for precise control of heating and air conditioning systems. This programmable device allows you to set individual temperature schedules for each day of the week, optimizing comfort and energy efficiency in your home or office. Its wireless design offers flexible placement of the thermostat unit, while the receiver unit connects directly to your boiler or air conditioning system, compatible with both 24V and 230V control circuits.

2. Ny votoatin'ny fonosana

Hamarino fa misy ny singa rehetra ao amin'ny fonosanao:

• 4 x COMPUTHERM Q7RF Room Thermostat (Transmitter Unit)
• 4 x COMPUTHERM Q7RF Receiver Unit
• User Manual (ity antontan-taratasy ity)
• Fametrahana screws sy rindrina plugs

3. Vokatra mihoatraview

The COMPUTHERM Q7RF system consists of two main components: the thermostat unit (transmitter) and the receiver unit. The thermostat unit measures the room temperature and allows you to set desired temperatures and programs. The receiver unit connects to your heating or cooling system and switches it on or off based on signals from the thermostat unit.

Sary 1: Tapitraview of the COMPUTHERM Q7RF 4-piece set, showing multiple thermostat and receiver units.

Figure 2: A single COMPUTHERM Q7RF thermostat unit communicating wirelessly with its receiver unit.

3.1 Thermostat Unit (Transmitter)

• LCD Display: Shows current temperature, set temperature, time, day, and program status.
• Bokotra fanaraha-maso: For setting temperature, time, and programming schedules.
• Efitra bateria: Ho an'ny famatsiana herinaratra.

3.2 Vondrona mpandray

• Wiring Terminals: For connection to the heating/cooling system.
• Toetra famantarana: LEDs to show power and relay status.
• Manual Override Buttons: For temporary manual control.

4. Famaritana

5. Fametrahana sy fametrahana

5.1 Thermostat Unit Placement and Battery Installation

1. Misafidiana toerana iray: Place the thermostat unit in a central area of the room where it can accurately measure the ambient temperature, away from direct sunlight, drafts, or heat sources.
2. Mametraka bateria: Open the battery compartment on the back of the thermostat unit. Insert the required batteries (typically AA or AAA, refer to the unit's markings) ensuring correct polarity. Close the compartment.
3. Herim-batana: The display should light up, indicating the unit is powered.

5.2 Receiver Unit Wiring

WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power to the heating/cooling system before proceeding.

1. Mametraka ny mpandray: Secure the receiver unit near your boiler or air conditioning system using the provided screws and wall plugs.
2. Access Wiring Terminals: Open the cover of the receiver unit to expose the wiring terminals.
3. Mifandray amin'ny System: Connect the receiver unit to the two-wire room thermostat connection point of your boiler or AC system. Ensure connections are secure and follow the wiring diagram provided with your heating/cooling system and the receiver unit. The COMPUTHERM Q7RF is compatible with both 24V and 230V control circuits.
4. Ampodio hery: Once wiring is complete and verified, close the receiver unit cover and restore power to your heating/cooling system.

5.3 Pairing the Units (If not pre-paired)

Refer to the specific instructions provided with your Q7RF set for pairing procedures. Typically, this involves pressing a pairing button on the receiver unit and then initiating a pairing sequence on the thermostat unit within a short timeframe. A successful pairing will usually be indicated by an LED on the receiver or a message on the thermostat display.

6. Torolàlana miasa

6.1 Fahatakarana ny fampisehoana LCD

The LCD display provides all necessary information about the thermostat's current status and settings.

Sary 3: antsipirihany view of the COMPUTHERM Q7RF LCD display, illustrating various indicators such as program number, manual modification symbol, weekdays, time, set temperature, actual room temperature, low battery symbol, boiler ON state, and timed control symbol.

• andro fiasana: Manondro ny andro amin'ny herinandro.
• Exact Time / Time Left: Displays the current time or time remaining for a manual modification.
• Laharan'ny programa: Shows the active program segment.
• Mametraha hafanana: The desired temperature set by the user.
• Actual Room Temperature: The current temperature measured by the thermostat.
• Symbol for Manual Modification: Indicates that the thermostat is currently operating under a temporary manual override.
• Temp. Modified until next manual intervention: Shows the duration of a temporary temperature change.
• Symbol for Low Battery Voltage: Appears when batteries need replacement.
• Symbol for Boiler ON State: Manondro rehefa miasa ny rafitra fanafanana/fampangatsiahana.
• Symbol for Timed Control: Indicates that a programmed schedule is active.

6.2 Fametrahana ny Ora sy ny Andro Ankehitriny

1. Tsindrio ny Time bokotra.
2. Ampiasao ny + or - bokotra hanitsy ny ora, dia tsindrio Time manamafy indray.
3. Avereno mandritra ny minitra sy andro amin'ny herinandro.

6.3 Fanitsiana mari-pana amin'ny tanana

1. Amin'ny fomba fiasa mahazatra, tsindrio ny + or - bokotra hanitsy ny mari-pana irina.
2. The new temperature will be maintained until the next programmed time slot or until manually overridden again.

6.4 Programming Daily/Weekly Schedules

The Q7RF allows for independent programming for each day of the week. You can typically set multiple time periods with different temperatures for each day.

1. Tsindrio ny PROG bokotra hiditra amin'ny fomba fandaharana.
2. Ampiasao ny ANDRO button to select the day you wish to program (e.g., MON, TUE, etc.).
3. Ampiasao ny Time SY +/- buttons to set the start time for the first program period.
4. Ampiasao ny MAMETY TEMP SY +/- buttons to set the desired temperature for this period.
5. mpanao gazety PROG again to move to the next program period for the same day, or use ANDRO hifindra amin'ny andro manaraka.
6. Repeat until all desired periods and days are programmed.
7. Tsindrio ny RUN or FIVOAHANA bokotra hitehirizana sy hivoahana amin'ny fomba fandaharana.

7. Fikojakojana

7.1 Fanoloana bateria

When the low battery symbol appears on the LCD display, replace the batteries immediately to ensure continuous operation. Use new, high-quality alkaline batteries of the specified type.

1. Sokafy ny fonon'ny fitoeran'ny bateria eo amin'ny faran'ny fitaovana thermostat.
2. Esory ny bateria taloha.
3. Insert new batteries, observing correct polarity (+/-).
4. Akatona ny fonon'ny efitrefitra bateria.

7.2 Fanadiovana

Clean the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the units, as this may damage the electronics or finish.

8. Famahana olana

9. Warranty sy fanohanana

COMPUTHERM products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, please reach out to the COMPUTHERM customer service or your local distributor. Keep your purchase receipt as proof of purchase.