Project Source Ceiling Fixture Instruction Manual

1. Vokatra mihoatraview

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Semi-Flushmount Ceiling Fixture. Designed for indoor use, this fixture features a white finish and an elegant etched frosted glass shade, providing diffused light suitable for various living spaces.

Image 1.1: The Project Source Semi-Flushmount Ceiling Fixture, showcasing its white base and decorative etched frosted glass shade.

2. Information momba ny fiarovana

Azafady vakio ary fantaro tsara ny toromarika rehetra alohan'ny hanombohana ny fametrahana. Ny tsy fanarahana ireto toromarika ireto dia mety hiteraka fahatairana herinaratra, afo, na loza hafa izay mety hiteraka ratra na fahasimbana ara-pananana.

• FAMPITANDREMANA: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
• Aza apetraka amin'ny toerana mando na mando ity fitaovana ity.amp toerana.
• Tandremo tsara ny fiasan'ny fitaratra mba hisorohana ny fahavakisan'ny fitaratra sy ny ratra.
• Ensure the fixture is securely mounted to a structural element of the ceiling.
• Ampiasao fotsiny ny karazana sy ny fombatage of bulbs specified for this fixture.

3. Ny votoatin'ny fonosana

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

• Semi-Flushmount Ceiling Fixture Body (1)
• Etched Frosted Glass Shade (1)
• Mounting Hardware Kit (includes screws, wire nuts, mounting bracket) (1 set)
• Decorative Finial (1)
• Boky Torolalana (ity antontan-taratasy ity) (1)

4. Fametrahana sy fametrahana

Fitaovana ilaina (tsy tafiditra): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.

1. Vonoy ny hery: Locate the circuit breaker or fuse box that controls the power to the light fixture you are replacing or installing. Turn off the power completely. Verify power is off using a voltage tester.
2. Omano ny fametrahana: If replacing an existing fixture, carefully remove it. Attach the mounting bracket (if not pre-attached) to the electrical junction box in the ceiling using the provided screws. Ensure the bracket is secure.
3. Wire fifandraisana:
   • Connect ny mainty tariby avy amin'ny fitaovana mankany amin'ny mainty tariby (mafana) avy ao amin'ny boaty fifandraisana amin'ny fampiasana voanjo tariby.
   • Connect ny fotsy tariby avy amin'ny fitaovana mankany amin'ny fotsy Tariby (tsy miandany) avy ao amin'ny boaty fifandraisana amin'ny fampiasana voanjo tariby.
   • Connect ny varahina maitso na miboridana ground wire from the fixture to the tany tariby avy amin'ny boaty fifandraisana (na mankany amin'ny visy maitso eo amin'ny bracket fametrahana) amin'ny fampiasana voanjo tariby.
   • Ampidiro amim-pitandremana ny tariby rehetra ao amin'ny boaty junction.
4. Attach Fixture Body: Align the fixture body with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the ceiling and stable.
5. Mametraka takamoa: Insert the recommended type and wattage of light bulbs (not included) into the sockets. Do not exceed the maximum wattage voalaza ao amin'ny fixture.
6. Attach Glass Shade: Carefully place the etched frosted glass shade onto the fixture body. Secure it in place using the decorative finial by screwing it onto the threaded rod at the bottom of the fixture until snug. Do not overtighten.
7. Ampodio hery: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box. Test the light fixture.

5. Torolàlana miasa

This Project Source ceiling fixture is designed for simple operation. Once properly installed and powered, it can be controlled via a standard wall switch. If your electrical setup includes a dimmer switch, ensure it is compatible with the type of bulbs you are using.

The product specifications indicate a "Remote" control method. If your specific model includes a remote control, please refer to the separate remote control instructions for pairing and operation. Otherwise, the fixture operates solely via the wall switch.

6. Fikojakojana

Regular maintenance will help preserve the appearance and functionality of your ceiling fixture.

• Fanadiovana: Always turn off power to the fixture and allow it to cool before cleaning. Wipe the fixture body with a soft, dry cloth. For the glass shade, use a mild glass cleaner applied to a cloth (not directly to the glass) and wipe gently. Do not use abrasive cleaners or solvents.
• Fanoloana takamoa: Ensure power is off and bulbs are cool before attempting to replace them. Unscrew the decorative finial and carefully remove the glass shade. Replace old bulbs with new ones of the correct type and wattage. Reattach the glass shade and finial.

7. Famahana olana

If you encounter issues with your fixture, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, consult a qualified electrician or contact customer support.

8. Famaritana

9. Warranty sy fanohanana

For warranty information or technical support, please refer to the documentation included with your purchase or contact Project Source customer service. Keep your purchase receipt for warranty claims.

For further assistance, you may visit the manufacturer's website or contact their support line. Contact details are typically found on the product packaging or the manufacturer's official website.