Boky Torolalana ho an'ny Mpampiasa ny Mpanonta Mifindra Amin'ny Hafanana/Fanafanana Mivantana Intermec PM43

1. Fampidirana

The Intermec PM43 is a mid-range industrial label printer designed for reliable performance and ease of use. This printer supports both direct thermal and thermal transfer printing methods, making it versatile for various labeling applications. It features a user-friendly interface, available with either a color touch-screen or universal icons, to simplify operation and reduce training requirements. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your PM43 printer.

Sary 1: Eo anoloana view of the Intermec PM43 printer, showing the control panel and media output slot.

2. Fametrahana

2.1 Famoahana sy fametrahana

Carefully remove the printer from its packaging. Ensure all packing materials are removed. Place the printer on a stable, flat surface with adequate space around it for ventilation and access to ports and media loading areas.

2.2 Hery mampifandray

1. Ensure the printer's power switch is in the OFF (O) position.
2. Connect the power cord to the printer's AC inlet.
3. Ampifandraiso amin'ny fivoahana elektrika miorim-paka ny tendrony hafa amin'ny tadin-jiro.

2.3 Connecting to a Host System

The PM43 printer supports USB and Ethernet connectivity.

• Fifandraisana USB: Ampifandraiso amin'ny seranana USB misy ao amin'ny solosainao ny tariby USB avy amin'ny seranana USB an'ny mpanonta.
• Fifandraisana Ethernet: Ampifandraiso amin'ny router na switch-nao ny tariby Ethernet avy amin'ny seranana Ethernet an'ny mpanonta.

Figure 2: Rear panel of the PM43 printer, illustrating the power inlet, power switch, USB ports, and Ethernet port.

2.4 Loading Media

The PM43 printer can use various media types, including labels, tags, and continuous media. For thermal transfer printing, a ribbon is also required.

1. Open the printer's media cover.
2. Apetraho eo amin'ny kodiaran'ny famatsiana fitaovana ny horonana misy ireo marika, ary alaivo antoka fa avy any amin'ny faran'ny horonana no miditra ireo marika.
3. Thread the media through the guides and under the printhead assembly.
4. If using thermal transfer, load the ribbon onto the ribbon supply spindle and thread it according to the internal diagrams.
5. Akatona ny fonon'ny haino aman-jery.

Sary 3: anatiny view of the PM43 printer, highlighting the media and ribbon loading mechanisms.

3. Torolàlana miasa

3.1 Mamelona/Mamono

• To power on, flip the power switch on the rear panel to the ON (I) position. The printer will perform a self-test.
• To power off, flip the power switch to the OFF (O) position.

3.2 Fanontana fototra

Once the printer is connected and media is loaded, you can send print jobs from your host system. Ensure the correct printer drivers are installed on your computer.

1. Sokafy ny antontan-taratasy na fampiharana izay tianao hanonta.
2. Select the Intermec PM43 printer from the print dialog.
3. Adjust print settings (e.g., label size, print density) as needed.
4. Atombohy ny asa fanontana.

3.3 Using the User Interface

The PM43 features either a color touch-screen or a universal-icon interface for direct control and configuration. Navigate through menus to adjust settings such as media calibration, network configuration, and printer status.

4. Fikojakojana

4.1 Fanadiovana ny Printhead

Regular cleaning of the printhead is crucial for maintaining print quality and extending the printhead's lifespan. Use a lint-free cloth or a printhead cleaning pen with isopropyl alcohol.

1. Power off the printer and disconnect the power cord.
2. Sokafy ny fonon'ny haino aman-jery.
3. Gently wipe the printhead element from the center outwards.
4. Allow the printhead to dry completely before closing the cover and powering on the printer.

4.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Refer to section 2.4 for loading instructions. Always ensure the correct media and ribbon types are used for optimal performance.

5. Famahana olana

This section addresses common issues you might encounter with your PM43 printer.

5.1 Ratsy kalitao fanontana

• Faded or incomplete print: Clean the printhead (see section 4.1). Ensure the ribbon (if thermal transfer) is correctly loaded and not depleted. Adjust print density settings.
• Smudged print: Verify media type is compatible. Ensure printhead pressure is correctly set.

5.2 Fifandonan'ny Media

• Vonoy ny mpanonta.
• Open the media cover and carefully remove any jammed media.
• Ensure media is loaded correctly and guides are properly adjusted.
• Close the cover and power on.

5.3 Olana mifandray

• Printer not detected: Check all cable connections (USB/Ethernet). Restart the printer and host system. Verify driver installation.
• Olan'ny tambajotra: Confirm network cable is connected. Check network settings on the printer and host system.

6. Famaritana

The following table outlines the key technical specifications for the Intermec PM43 printer.

Figure 4: Regulatory and compliance labels found on the Intermec PM43 printer.

7. Fampahalalana momba ny fiantohana

The Intermec PM43 printer is covered by a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermec support website.

8. Fanohanana

For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Intermec support website or contact your authorized Intermec dealer. Ensure you have your printer's model number (PM43A01000000201) and serial number available when seeking support.