Sava lalana
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
The LUXOR FP4000 is designed to accommodate large flat-panel TVs from 40" to 80", supporting up to 200 lbs. It features adjustable viewing heights, an integrated cable management system, a convenient accessory shelf, and mobile casters with locking brakes for versatile display solutions.
Information momba ny fiarovana
- Hamarino tsara fa eo daholo ny singa rehetra ary tsy misy simba alohan'ny hanakambanana azy.
- Do not exceed the maximum weight capacity of 200 lbs for the TV mount and 25 lbs for the accessory shelf.
- Always use two or more people for assembly and moving the stand with a TV mounted.
- Ensure all screws are securely tightened before use. Do not overtighten.
- Engage the locking brakes on all casters when the stand is in a stationary position.
- Arovy ny ankizy sy ny biby fiompy lavitra ny faritra hanaovana fivoriambe.
- Ario am-pahamendrehana ny fitaovana famonosana.
Fonosana fonosana
Please verify that all parts are included in your package. If any parts are missing or damaged, contact Luxor customer support.
- Base Assembly with Casters
- Vertical Support Columns (2)
- TV Mounting Bracket
- Fitaovana fitehirizana
- Hardware Kit (screws, washers, tools)
- Boky torolalana
Sary: Overview of the LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand, showing its main components including the base, vertical columns, TV mount, and accessory shelf.
Setup sy Assembly
Follow these steps carefully for proper assembly. It is recommended to have at least two people for assembly.
Step 1: Attach Vertical Support Columns to Base
- Place the base assembly on a flat, stable surface.
- Align the vertical support columns with the mounting points on the base.
- Secure the columns using the provided screws and tools. Ensure they are firmly attached.
Sary: A view of the TV stand during assembly, showing the vertical support columns being attached to the mobile base. This image highlights the structural connection points.
Step 2: Install TV Mounting Bracket
- Attach the TV mounting bracket to the top of the vertical support columns.
- Use the designated screws and ensure the bracket is level and secure.
- Refer to your TV's manual for specific VESA mounting patterns and screw sizes.
Image: The TV stand with the mounting bracket installed at the top of the vertical columns, ready to receive a television. This shows the upper part of the stand.
Step 3: Attach Accessory Shelf
- Position the accessory shelf at your desired height on the vertical support columns.
- Secure the shelf using the provided hardware. Ensure it is level and stable.
Image: The LUXOR FP4000 TV Stand with the accessory shelf attached to the vertical columns, positioned below the TV mounting bracket. This illustrates the shelf's placement.
Step 4: Mount the Television
- Carefully lift your television and align its VESA mounting holes with the bracket on the stand.
- Secure the TV to the bracket using the appropriate screws and spacers from the hardware kit.
- Ensure the TV is securely fastened and level before releasing azy.
Image: A fully assembled LUXOR FP4000 TV Stand, viewed from the front, with a television mounted on its bracket and the accessory shelf in place. This shows the complete product.
Torolàlana miasa
Adjusting TV Height
The TV mounting bracket can be adjusted in 2-inch increments from 48" to 65" (measured from the floor to the center of the TV). To adjust the height:
- With two people, carefully lift the TV slightly to relieve pressure on the locking pins.
- Locate the height adjustment pins on the vertical columns.
- Pull out the pins, adjust the TV to the desired height, and re-insert the pins securely into the corresponding holes.
- Ensure both sides are adjusted to the same height and pins are fully engaged before releasing ny fahitalavitra.
Mamindra ny Stand
The stand is equipped with four 3" full-swivel casters for mobility.
- Mba hamindrana ny fijoroana, alaivo antoka fa tsy mihidy tsara ny frein rehetra.
- Push the stand carefully to its new location. Avoid sudden movements or pushing over uneven surfaces.
- Once in the desired position, engage the locking brakes on all four casters to secure the stand.
Fitantanana tariby
Utilize the integrated cable management system within the steel columns to keep cables organized and out of sight. Route TV and accessory cables through the designated openings in the columns for a clean and professional appearance.
fikarakarana
- Fanadiovana: Kosehina amin'ny lamba malefaka, damp lamba. Halaviro ny mpanadio na solvents.
- Fanamarinana fitaovana: Hamarino tsindraindray ny visy sy bolt rehetra mba hahazoana antoka fa mafy orina izy ireo. Atsofohy indray raha ilaina.
- Fanaraha-maso ny Caster: Inspect casters for debris or damage. Clean as needed to ensure smooth operation.
- Lanja fetra: Always adhere to the specified weight limits for the TV and accessory shelf.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Mihozongozona na tsy milamina ny stand. | Visy mivaha na ambonin'ny tany tsy mitovy. | Check and tighten all assembly screws. Move stand to a level surface. Ensure caster brakes are engaged. |
| Tsy mihodina moramora ny kodiarana. | Debris in casters or engaged brakes. | Clear any debris from the caster wheels. Ensure all caster brakes are disengaged. |
| TV height adjustment is difficult. | Weight on pins or pins misaligned. | Ensure two people are lifting the TV slightly to relieve pressure. Verify pins are correctly aligned with holes. |
| Accessory shelf is not level. | Fametrahana tsy mety. | Re-install the accessory shelf, ensuring it is properly seated and secured at both attachment points. |
fepetra arahana
- Modely: FP4000
- marika: Luxor
- Fitaovana: Fiara vy
- loko: Mainty
- Haben'ny fahitalavitra mifanentana: 40" to 80" flat-panel TVs
- Maximum TV Weight Capacity: 200 kg
- Haben'ny fijoroana: 39.25"W x 28.25"D x 48" to 65"H (adjustable in 2" increments)
- Accessory Shelf Dimensions: 19.625"S x 11"D
- Accessory Shelf Weight Capacity: 25 kg
- Casters: Four 3" full-swivel casters, all with locking brakes
- Karazana fametrahana: Adjustable
- UPC: 847210034896
Image: The LUXOR FP4000 TV Stand, illustrating its overall dimensions and key features. This image provides a visual reference for the product's size and design.
Warranty sy fanohanana
For warranty information, technical support, or to order replacement parts, please contact Luxor customer service. Refer to the official Luxor webtranonkala raha mila ny antsipirian'ny fifandraisana farany sy ny politika momba ny fiantohana.
Luxor Customer Service: Visit Luxor Contact Us Page
Please have your model number (FP4000) and purchase date available when contacting support.
