Sava lalana
Thank you for choosing the DS18 PRO-X6BM 6.5" Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your new speaker. Designed for high-quality audio reproduction, the PRO-X6BM delivers clear and powerful midrange sound for your car or truck stereo system.
Endriky ny vokatra
- Midrange Performance: Engineered to handle the crucial mid-range frequencies of the audible sound spectrum, providing excellent clarity for instrumentals and vocals.
- Fikarakarana hery ambony: Delivers an impressive 500W Max Power and 250W RMS at 8 Ohms, suitable for a wide range of audio setups.
- Durable Voice Coil: Features a 1.5" high-temperature CCAW voice coil designed for extreme heat resistance and long-term structural integrity.
- Feo nohatsaraina: Upgrade your existing stereo system with a speaker that provides superior midrange detail compared to stock options.
- Integrated Bullet Dust Cover: Includes a specially designed bullet dust cover to protect the voice coil and optimize sound output.
fepetra arahana
| endri-javatra | antsipirihany |
|---|---|
| Type | Midrange Loudspeaker with Bullet |
| Size | 6.5 santimetatra |
| Hery RMS | 250W |
| MAX Hery | 500W |
| Famaliana matetika | 118-17KHz |
| Impedance | 8 ohm |
| fahatsapana | 90dB |
| Haben'ny Voice Coil | 1.5 santimetatra |
| Haben'ny andriamby | 30 ,XNUMXoz |
| Lalin'ny fametrahana | 2.72 santimetatra (69 mm) |
| Haben'ny fanapahana | 5.7 santimetatra (145 mm) |
| Material (Cone) | Non-Pressed Paper Cone |
| Fitaovana (Rafitra) | Hazo vy mena |
| Material (Surround) | Sisin'ny lamba |
| Anisan'ny singa | 1 x mpandahateny |
Fametrahana sy fametrahana
Proper installation is crucial for optimal performance and longevity of your DS18 PRO-X6BM loudspeaker. It is recommended to have this product installed by a professional car audio technician.
Fitaovana sy fitaovana ilaina:
- Screwdriver napetraka
- Wire strippers/crimpers
- Drill (if custom mounting is required)
- Wire fanamafisam-peo (fandrefesana mety amin'ny rafitrao)
- Connectors (spade terminals, butt connectors, etc.)
- Mounting hardware (screws, clips - typically included)
- Sound deadening material (optional, for improved audio quality)
Dingana fametrahana:
- Fiarovana voalohany: Disconnect the vehicle's negative battery terminal before beginning any electrical work to prevent short circuits.
- Mifidiana toerana fametrahana: Identify suitable locations in your vehicle (e.g., door panels, rear deck) that accommodate the speaker's dimensions (6.5" diameter, 2.72" mounting depth). Ensure there is sufficient clearance behind the speaker.
- Omano ny tampon-trano: If replacing existing speakers, remove the old units. If creating new openings, carefully mark and cut the speaker holes according to the cut-out dimension (5.7" / 145mm).
- Wiring: Connect the speaker wires to the terminals on the PRO-X6BM. Ensure correct polarity (positive to positive, negative to negative) to avoid phase issues. Use appropriate connectors for secure connections.
- Mpandahateny azo antoka: Place the speaker into the mounting opening and secure it using the provided screws. Do not overtighten.
- Connect to Amplifier/Head Unit: Route the speaker wires to your amplifier or head unit. Connect them according to your audio system's wiring diagram. The PRO-X6BM has an 8 Ohm impedance.
- Rafitra fitsapana: Reconnect the vehicle's negative battery terminal. Turn on your audio system and test the speakers at a low volume. Gradually increase the volume to ensure proper operation and sound quality.
Torolàlana miasa
Once installed, your DS18 PRO-X6BM loudspeaker is ready for use. Follow these guidelines for optimal audio experience:
- Vanim-potoana fisarahana: Allow a break-in period of approximately 10-20 hours of normal listening at moderate volumes. This allows the speaker's suspension to loosen up, improving overall sound quality and longevity.
- Fanaraha-maso ny feo: Always start with a low volume and gradually increase it. Avoid excessive volume levels that cause audible distortion, as this can damage the speakers and your hearing.
- Fampitaviana (EQ): Adjust your head unit or amplifier's equalizer settings to fine-tune the sound to your preference. The PRO-X6BM excels in midrange frequencies, so focus on enhancing those without overdriving the speaker.
- Fikirana Crossover: Raha mampiasa ivelany amplifier with crossover settings, it is recommended to set a high-pass filter (HPF) to protect the midrange speaker from low bass frequencies it is not designed to reproduce. Consult your amplifier's manual for recommended settings.
fikarakarana
To ensure the longevity and optimal performance of your DS18 PRO-X6BM loudspeakers, follow these simple maintenance tips:
- Fanadiovana tsy tapaka: Gently wipe the speaker cones and surrounds with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or excessive moisture.
- Jereo ny fifandraisana: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor sound quality or speaker damage.
- Fadio ny manao zavatra tafahoatra: Do not continuously play music at distortion-inducing volumes. This can overheat the voice coil and lead to permanent damage.
- Fiarovana ny tontolo iainana: While designed for automotive use, avoid exposing speakers to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
Fanamboarana
If you experience issues with your DS18 PRO-X6BM loudspeaker, refer to the following troubleshooting guide:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| No Sound from Speaker | Loose or disconnected wiring; amplifier off or in protect mode; incorrect head unit settings; damaged speaker. | Check all speaker wire connections for tightness and correct polarity. Verify amplifier is powered on and not in protect mode. Ensure head unit balance/fader settings are correct. Test speaker with another known good audio source or speaker. |
| Feo diso | Volume too high; incorrect amplifier gain settings; improper crossover settings; damaged speaker. | Ahena ny feo. Ahitsio amplifier gain settings to prevent clipping. Verify high-pass filter (HPF) is set correctly to prevent bass frequencies from reaching the midrange speaker. Inspect speaker cone for physical damage. |
| Weak or Muffled Sound | Incorrect wiring polarity; poor speaker placement; EQ settings. | Double-check speaker wire polarity. Ensure speakers are not obstructed. Adjust EQ settings on your head unit or amplifier to enhance midrange frequencies. |
Warranty sy fanohanana
DS18 products are designed for durability and performance. For specific warranty details, please refer to the documentation included with your product or visit the official DS18 website. General warranty information includes:
- Garantie voafetra: This product typically comes with a limited manufacturer's warranty.
- Politika famerenana: Products purchased may be eligible for a 30-day refund or replacement policy.
- Drafi-piarovana lavitra: Optional 2-Year and 3-Year protection plans are available for purchase to extend coverage.
For technical support, troubleshooting assistance, or warranty claims, please contact DS18 customer service through their official channels.
