MasterVolt Mass 24/15-2 Battery Charger User Manual

1. Fampidirana

This manual provides essential information for the safe and efficient operation of your MasterVolt Mass 24/15-2 Battery Charger. Designed for professional, semi-professional, and recreational applications, the Mass series ensures a reliable and continuous power supply even under extreme conditions. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your device.

2. Torolàlana momba ny fiarovana

Always adhere to the following safety guidelines to prevent injury, damage to the charger, or damage to connected equipment.

• Fiarovana herinaratra: Ensure all electrical connections are made by a qualified professional. Disconnect power before performing any maintenance or installation.
• rivotra: Install the charger in a well-ventilated area to prevent overheating. Do not block ventilation openings.
• Tontolo iainana: Avoid exposure to water, excessive humidity, or extreme temperatures. Do not operate in explosive atmospheres.
• Fiarovana ny bateria: Always wear eye protection and gloves when working with batteries. Ensure proper battery ventilation to prevent gas accumulation.
• Fandehanana: The charger must be properly grounded to prevent electrical shock.

3. Vokatra mihoatraview

The MasterVolt Mass 24/15-2 is a robust and technically advanced automatic battery charger. Its design emphasizes sustainability and reliability, featuring an exceptionally effective use of consumed input current and faster charging capabilities.

Sary 1: anoloana view of the MasterVolt Mass 24/15-2 Battery Charger. The image shows a rectangular unit with a silver-grey ribbed casing on the left and right sides, and a teal-colored control panel in the center. The control panel features a power switch, LED indicators for charge percentage (100%, 75%, 50%, 25%), and status indicators for battery type and charging mode. The bottom section of the unit displays 'MASS 24/15' and 'MASTERVOLT' branding, along with four cable glands for connections.

Ny endri-javatra fototra dia ahitana:

• Automatic battery charging for various battery types.
• High efficiency with a power factor (cos phi) greater than 0.98.
• Robust construction for demanding environments.
• Long operational lifespan, proven in practice.

4. Fametrahana

Proper installation is crucial for the performance and safety of your MasterVolt Mass 24/15-2 charger. It is recommended that installation be performed by a qualified technician.

1. Mametraka: Select a dry, well-ventilated location, away from flammable materials and direct sunlight. Securely mount the charger using appropriate fasteners.
2. AC Input Connection: Connect the charger to a suitable AC power source (230V/50-60Hz) according to local electrical codes. Ensure the circuit is protected by an appropriately rated fuse or circuit breaker.
3. DC Output Connection: Connect the DC output cables from the charger to your battery bank. Observe correct polarity: positive (+) to positive, and negative (-) to negative. Use cables of adequate gauge to minimize voltage mitete.
4. Fandehanana: Connect the charger's grounding terminal to a reliable earth ground.
5. Fanamarinana voalohany: Before applying power, double-check all connections for tightness and correct polarity.

5. Fiasana

Once installed, operating the MasterVolt Mass 24/15-2 charger is straightforward.

1. Herim-batana: Ensure the AC input power is supplied to the charger. The charger will typically initiate its startup sequence.
2. Toetra famantarana: Observe the LED indicators on the control panel. These will show the charging progress (e.g., 25%, 50%, 75%, 100% charge level) and the current charging status (e.g., bulk, absorption, float).
3. Fampandehanana mandeha ho azy: The charger is designed to automatically detect the battery's state and apply the appropriate charging profile. No manual intervention is typically required during the charging cycle.
4. Mamono hery: To stop charging, simply disconnect the AC input power.

6. Fikojakojana

Regular maintenance ensures the long-term reliability and performance of your MasterVolt Mass 24/15-2 charger.

• Fanadiovana: Periodically clean the exterior of the charger with a soft, dry cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
• Fanamarinana fifandraisana: Annually inspect all electrical connections for tightness and signs of corrosion. Tighten any loose connections.
• rivotra: Ensure the installation area remains well-ventilated and that airflow to the charger is not obstructed.
• Fanaraha-maso ny bateria: Regularly inspect your batteries for signs of damage, corrosion, or swelling. Ensure battery terminals are clean and secure.

7. Famahana olana

Ity fizarana ity dia manome vahaolana amin'ireo olana mahazatra mety ho hitanao.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Mastervolt customer support.

8. Famaritana

The following table outlines the key technical specifications for the MasterVolt Mass 24/15-2 Battery Charger.

9. Warranty sy fanohanana

For warranty information, technical support, or service inquiries, please refer to the official Mastervolt website or contact your authorized Mastervolt dealer. Keep your purchase receipt as proof of purchase.