Boky Torolalana ho an'ny Byron Illuminated Wired Bell Push 7960B

1. Fampidirana

Thank you for choosing the Byron 7960B Illuminated Wired Bell Push. This manual provides essential information for the safe installation, operation, and maintenance of your new bell push. Please read these instructions carefully before installation and retain them for future reference.

2. Vokatra mihoatraview

The Byron 7960B is a surface-mounted, wired bell push featuring a durable brass finish and an illuminated button for enhanced visibility. It is designed to be connected to an existing wired doorbell chime system.

A close-up view of the Byron 7960B Illuminated Wired Bell Push, featuring a polished brass rectangular housing and a central clear push button with a brass center. The design is suitable for surface mounting.

3. Information momba ny fiarovana

• Always disconnect power to the doorbell circuit at the main fuse box or circuit breaker before attempting any installation or maintenance.
• Raha misy tsy azonao antoka momba ny ampahany amin'ny dingana fametrahana dia manatona elektrisianina mahay.
• This product is designed for low-voltage wired doorbell systems. Do not connect to mains voltage mivantana.
• Ensure all wiring connections are secure and insulated to prevent short circuits.
• Arovy amin'ny ankizy ny fitaovana famonosana.

4. Ny votoatin'ny fonosana

• Byron 7960B Illuminated Wired Bell Push
• Fametrahana screws
• Micro LED Bulb (for illumination)

5. Fametrahana sy fametrahana

5.1. Fitaovana ilaina

• Visy mpanenjana (mety amin'ny fametrahana visy)
• Fandavahana (raha ilaina ny lavaka fametrahana vaovao)
• Wire Strippers
• pensilihazo

5.2. Torolàlana tariby

1. Tapaka ny hery: Before starting, ensure the power to your existing doorbell system is turned off at the main electrical panel.
2. Remove Old Bell Push (if applicable): Carefully remove your old bell push, noting how the wires are connected.
3. Manomàna tariby: Gently strip a small amount of insulation (approximately 1/4 inch) from the ends of the two low-voltage doorbell wires.
4. Connect Wires: Connect one doorbell wire to each of the two terminals on the back of the Byron 7960B bell push. Ensure connections are tight and secure.

5.3. Connecting the Illumination LED

The micro LED bulb for illumination needs to be connected manually. This process can be delicate:

1. Locate the two small wires extending from the micro LED bulb.
2. Carefully connect these LED wires to the same two terminals where the main doorbell wires are connected. The LED is typically non-polarised, so the orientation of its wires usually does not matter for basic function, but if it doesn't light up, try reversing the LED wire connections.
3. Ensure all four wire connections (two doorbell, two LED) are securely fastened to the two terminals on the bell push.

5.4. Torolàlana momba ny fametrahana

1. Fametrahana: Hold the bell push in the desired mounting location. Use a pencil to mark the positions for the mounting screws.
2. Fandavahana lavaka (Drill Pilot Hole): If necessary, drill small pilot holes at the marked positions.
3. Secure Bell Push: Feed the doorbell wires through the opening in the back of the bell push. Align the bell push with the pilot holes and secure it firmly to the surface using the provided mounting screws. Do not overtighten.
4. Ampodio hery: Once the bell push is securely mounted and all connections are made, restore power to the doorbell circuit at your main electrical panel.

6. Fampandehanana

After successful installation and power restoration, the LED in the bell push should illuminate, indicating it is ready for use. Press the button firmly to activate your doorbell chime. The bell push is designed for momentary contact, meaning the chime will sound only while the button is pressed.

7. Fikojakojana

• Fanadiovana: To maintain the brass finish, wipe the bell push regularly with a soft, dry cloth. Avoid abrasive cleaners or chemicals that could damage the finish.
• Fanaraha-maso: Periodically check the mounting screws for tightness and the wiring for any signs of wear or damage.
• No user-serviceable parts are inside the sealed unit.

8. Famahana olana

9. Famaritana

• Laharana modely: 7960B
• Karazana: Wired Bell Push
• Mametraka: Surface Mounted
• vita: varahina
• Fanazavana: Yes (Micro LED)
• Loharano herinaratra: Ambany Voltage (from doorbell transformer)
• Ny haben'ny fonosana: 5.59 x 3.7 x 1.26 santimetatra
• Lanja entana: 1.44 oz
• Batterie ilaina: tsy misy

10. Warranty sy fanohanana

Byron products are manufactured to high standards. For specific warranty details and customer support, please refer to the documentation provided at the time of purchase or visit the official Byron website. Tehirizo ny porofon'ny fividiananao ho an'ny fitakiana fiantohana.