Boky Torolalana ho an'ny Mpampiasa ny Takelaka Mère Supermicro X10SLM+-LN4F

1. Fampidirana

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Supermicro X10SLM+-LN4F motherboard. Designed for server applications, this motherboard features an LGA1150 socket, Intel C224 PCH, DDR3 memory support, and multiple Gigabit Ethernet ports. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

2. Vokatra mihoatraview

The Supermicro X10SLM+-LN4F is a microATX server motherboard built for reliability and performance. Key features include:

• LGA1150 Socket for Intel Xeon E3-1200 v3/v4 and 4th Gen Core i3 processors.
• Intel C224 PCH chipset.
• Four DDR3 DIMM slots supporting up to 64GB ECC/non-ECC UDIMM.
• Multiple SATA3 (6Gbps) ports.
• Integrated quad Gigabit Ethernet ports.
• USB 3.0 and USB 2.0 support.
• VGA output for integrated graphics.

Sary 2.1: Avy any ambony view of the Supermicro X10SLM+-LN4F motherboard, showing the CPU socket, DIMM slots, PCIe slots, and various connectors.

Sary 2.2: zorony view of the motherboard, highlighting the layout of components and expansion slots.

Sary 2.3: Rear I/O panel of the Supermicro X10SLM+-LN4F motherboard, featuring multiple LAN ports, USB ports, and serial ports.

3. Fametrahana sy fametrahana

Before beginning installation, ensure your system is powered off and disconnected from the power source. Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

3.1. Fametrahana CPU

1. Tadiavo ny socket LGA1150 CPU amin'ny reny.
2. Gently push down the load lever and pull it to the side to open the CPU socket retention frame.
3. Carefully align the triangular mark on the CPU with the corresponding mark on the socket.
4. Place the CPU into the socket without forcing it.
5. Close the retention frame and secure it with the load lever.
6. Apply a thin, even layer of thermal paste to the CPU's integrated heat spreader (IHS).
7. Apetraho araka ny torolalan'ny mpanamboatra azy ny fampangatsiahana ny CPU.

3.2. Fametrahana ny Fahatsiarovana (RAM)

1. Locate the four DDR3 DIMM slots. For optimal performance, refer to the motherboard's specific memory population guidelines, typically starting with slots closest to the CPU or specific colored slots for dual-channel configurations.
2. Sokafy ireo clip fihazonana eo amin'ny andaniny roa amin'ny slot DIMM.
3. Ampifanaraho amin'ny fanalahidy ao amin'ny slot DIMM ny elanelana eo amin'ny môdio fahatsiarovana DDR3.
4. Ampidiro tsara ao anatin'ilay lavaka ny môdio fahatsiarovana mandra-piraikitra tsara amin'ny toerany ireo clip fitazonana.
5. Hamarino tsara fa mihidy tsara ireo clip roa ireo ary mipetraka tsara ny môdely.

3.3. Fametrahana fitaovana fitahirizana

Connect SATA storage devices (HDDs/SSDs) to the SATA ports on the motherboard using SATA data cables. Connect the power cables from your power supply unit (PSU) to the storage devices.

3.4. Fametrahana Karatra Fanitarana

This motherboard features PCI Express (PCIe) slots. To install an expansion card:

1. Remove the corresponding slot cover from your chassis.
2. Align the expansion card with the PCIe slot.
3. Tsindrio mafy mandra-pipetraky ny karatra tanteraka ao anaty lavaka.
4. Secure the card with a screw or retention clip from your chassis.

3.5. Fifandraisana herinaratra

• 24-pin ATX Power Connector: Connect the main 24-pin power cable from your PSU to the ATX power connector on the motherboard.
• 8-pin EPS/CPU Power Connector: Connect the 8-pin (or 4+4 pin) CPU power cable from your PSU to the EPS connector near the CPU socket.

3.6. Fifandraisana I/O eo anoloana sy aoriana

• Front Panel Connectors: Connect the power switch, reset switch, power LED, and HDD activity LED cables from your chassis to the corresponding pins on the motherboard's front panel header. Refer to the motherboard's silkscreen labels for correct orientation.
• USB Lohateny: Connect front panel USB ports to the onboard USB headers.
• Audio Headers: Connect front panel audio jacks to the onboard audio header.
• Rear I/O Panel: Connect peripherals such as keyboard, mouse, monitor (via VGA), and network cables (to the Gigabit Ethernet ports) to the rear I/O panel.

4. Torolàlana miasa

4.1. Initial Power On and BIOS/UEFI Setup

1. After all components are installed and connected, connect the power cord to the PSU and turn on the power switch on the PSU.
2. Tsindrio ny bokotra fampandehanana ny fiaranao.
3. During the Power-On Self-Test (POST), repeatedly press the do or F2 key (or as indicated on screen) to enter the BIOS/UEFI setup utility.
4. In the BIOS/UEFI, configure essential settings such as date and time, boot order, and enable/disable specific features as required for your operating system and hardware.
5. Save changes and exit the BIOS/UEFI. The system will restart.

4.2. Fametrahana Rafitra Fiasa

To install an operating system (e.g., Windows, Linux, VMware ESXi):

1. Insert the operating system installation media (USB drive or DVD) into the system.
2. Boot from the installation media (you may need to adjust the boot order in BIOS/UEFI).
3. Follow the on-screen prompts to install the operating system on your chosen storage device.
4. After installation, install all necessary drivers for the motherboard components (chipset, LAN, VGA, etc.) from the Supermicro website or the provided driver disc.

5. Fikojakojana

Ny fikojakojana tsy tapaka dia manampy amin'ny fiantohana ny faharetan'ny fampiasana sy ny fiasan'ny motherboard-nao.

5.1. Fanadiovana

• Periodically clean dust from the motherboard and system components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Fadio ny mampiasa ranoka fanadiovana mivantana amin'ireo singa ao anaty fiara.
• Ensure proper airflow within the chassis by keeping fan vents clear.

5.2. Firmware and Driver Updates

• Jereo ny Supermicro website periodically for updated BIOS/UEFI firmware and drivers for your motherboard model.
• Follow the provided instructions carefully when updating firmware to avoid system instability.

5.3. Hevitra momba ny tontolo iainana

• Operate the motherboard within recommended temperature and humidity ranges to prevent damage.
• Ensure adequate ventilation in the server chassis.

6. Famahana olana

Ity fizarana ity dia manome vahaolana amin'ireo olana mahazatra mety ho hitanao.

6.1. No Power / No POST (Power-On Self-Test)

• Verify that the power supply unit (PSU) is connected correctly to the motherboard (24-pin ATX and 8-pin EPS connectors).
• Ensure the PSU is switched on and receiving power from the wall outlet.
• Check that the front panel power switch cable is correctly connected to the motherboard header.
• Reseat the CPU, RAM modules, and any expansion cards.
• Try booting with only essential components (CPU, one RAM stick, CPU cooler) to isolate the issue.
• Listen for beep codes from the system speaker, which can indicate specific hardware failures. Refer to the Supermicro website for beep code interpretations.

6.2. Asehoy ny olana

• Ensure the monitor is properly connected to the motherboard's VGA port.
• Hamarino tsara fa mandeha ny monitor ary apetraka amin'ny loharano fidirana marina.
• If using a discrete graphics card, ensure it is properly seated and connected to power (if required).

6.3. Operating System Not Booting

• Check the boot order in the BIOS/UEFI to ensure the correct storage device is prioritized.
• Verify that the operating system is installed correctly on the storage device.
• Ensure SATA data and power cables are securely connected to the storage device and motherboard.

7. Famaritana

Below are the technical specifications for the Supermicro X10SLM+-LN4F motherboard:

Note: Specifications are subject to change without notice. For the most current information, please refer to the official Supermicro product page.

8. Warranty sy fanohanana

For detailed warranty information, please refer to the warranty card included with your product or visit the official Supermicro website. Technical support is available through Supermicro's customer service channels, including their support portal, email, and phone. Please have your product model number (X10SLM+-LN4F) and serial number ready when contacting support.

For the latest drivers, BIOS updates, and additional documentation, please visit: www.bbt-roxro.com