1. Fampidirana
This manual provides essential information for the safe and correct installation, operation, and maintenance of your Legrand E14 Lamp Holder, model LEG91123. This product is designed for use with E14 screw-base bulbs, with a maximum wattage of 60W and operating at 230 Volts.
2. Information momba ny fiarovana
WARNING: Risk of electric shock. Always disconnect power at the main circuit breaker before installing or servicing electrical components.
- Ny elektrisianina mahafeno fepetra na olona mahefa ihany no tokony hanao ny fametrahana azy.
- Ensure the power supply is completely off before beginning any work.
- Aza mihoatra ny wat naoty ambony indrindratage of 60W for the connected bulb.
- Hamarino fa ny fifandraisana rehetra dia azo antoka sy tsara insulated.
- Ity vokatra ity dia natao hampiasaina an-trano amin'ny toerana maina ihany.
3. Vokatra singa
The Legrand E14 Lamp Holder consists of several parts designed for secure and reliable bulb connection.
Figure 3.1: Complete Legrand E14 Lamp Holder. This image shows the complete Legrand E14 lamp holder, featuring the threaded body for bulb insertion and the base for electrical connection.
Figure 3.2: Legrand E14 Lamp Holder disassembled. This image illustrates the main components of the Legrand E14 lamp holder, including the outer casing, internal mechanism, and shade ring.
- ivelany Casing: Made of white polyamide material, providing insulation and protection.
- Mekanisma anatiny: Contains the electrical contacts and wiring terminals.
- Shade Ring: Used to secure a lampaloky ny lamp mpihazona.
4. Torolàlana fametrahana
Follow these steps for proper installation of the Legrand E14 Lamp Mpitana.
- Manomana Wiring: Ensure the power supply is disconnected. Strip approximately 8-10mm of insulation from the ends of the electrical wires.
- Access Terminals: Ny lamp holder's internal mechanism may need to be partially disassembled to access the wiring terminals. Refer to Figure 3.2 for component identification.
- Connect Wires: Insert the stripped wire ends into the designated terminals. The wire entry can be from the side or via a screw connection. Secure the wires firmly by tightening the terminal screws. Ensure no loose strands are present.
Figure 4.1: Internal wiring terminals. This image displays the internal wiring terminals of the Legrand E14 lamp holder, where electrical wires are connected.
- Manangona indray: Carefully reassemble the lamp holder components, ensuring all parts are correctly aligned and secured.
- Mametraka: Ny lamp holder is designed for installation on a Ø10 male connector. Secure the lamp holder to the fixture using the appropriate mounting method.
- Attach Shade Ring (Optional): Raha mampiasa alampshade, slide the shade ring over the threaded part of the lamp holder and tighten it to secure the lampalokaloka.
5. Fampandehanana
Once installed, operating the lamp holder is straightforward:
- Ampidiro takamoa: Gently screw an E14 screw-base bulb into the lamp tazonina mandra-pahafatiny. Aza mihenjana loatra.
- Ampodio hery: Turn on the power supply at the main circuit breaker.
- Fitsapana: Activate the light switch to confirm proper operation.
6. Fikojakojana
The Legrand E14 Lamp Holder requires minimal maintenance.
- Fanadiovana: Disconnect power before cleaning. Wipe the exterior with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Fanaraha-maso: Tsidiho tsindraindray ny lamp holder for any signs of damage, wear, or loose connections. If any issues are found, disconnect power and address them immediately.
- Fanoloana takamoa: Always disconnect power before replacing a bulb. Allow the old bulb to cool completely before removal.
7. Famahana olana
Raha sendra olana amin'ny lamp holder, refer to the following common problems and solutions:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy mirehitra ny jiro | Tsy misy famatsiana herinaratra | Hamarino ny fiatoana amin'ny circuit sy ny switch wall. |
| Tsy mirehitra ny jiro | Bulob diso | Replace the bulb with a new, working E14 bulb (max 60W). |
| Tsy mirehitra ny jiro | Ny fifandraisana wiring malalaka | Disconnect power and check all wire connections within the lamp holder. Tighten if necessary. |
| Jiro mitsilopilopy | Tavoahangy malalaka na fifandraisana | Ensure the bulb is screwed in tightly. Disconnect power and check wiring connections. |
8. Famaritana ara-teknika
- marika: Legrand
- Laharana modely: LEG91123
- Karazana takamoa: E14 Screw-base
- Fitaovana: Polyamide-Imide
- loko: White
- BOKYtage: 230 Volts
- Hery ambony indrindra: 60 Watts
- Ny haben'ny vokatra (L x W x H): 3 x 3 x 6 cm
- Lanja: 50 grama
- Karazana fametrahana: For Ø10 male connector
- Fepetra mifanaraka amin'ny fenitra: NF
- Firenena nihaviana: CHINE
9. Warranty sy fanohanana
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Keep your proof of purchase for warranty claims.
