Boky Torolàlana ho an'ny Mpampiasa Paompy Seramika Alphacool DC-LT 3600

1. Fampidirana sy Fitohizanaview

The Alphacool DC-LT ceramic 12 Volt pump is a compact and powerful solution designed for water cooling systems, particularly suitable for barebones, HTPC, and desktop systems where quiet operation is a priority. While traditional water cooling often targets extreme overclocking, this pump focuses on providing efficient cooling with minimal noise, contributing to an overall silent system. Its ceramic shaft ensures a long lifespan and consistently smooth operation. With dimensions comparable to a 2 Euro coin, it is one of the most compact water cooling pumps available for computer cooling applications.

2. Toetran'ny vokatra

• 12V ceramic pump for water cooling applications.
• Compact dimensions (WxHxD): 51x48x9mm (without fittings), making it highly space-efficient.
• Maximum flow rate of approximately 120 liters per hour (l/h).
• Pressure head at 12V: 2.2 meters H2O.
• Power connector: Standard 3-Pin fan plug for easy integration.
• Navela voltagtariby: 5-13.5V DC.
• Designed for quiet operation, though noise levels can vary based on voltage and system setup.
• Ceramic shaft for extended durability and smooth performance.

3. Ny votoatin'ny fonosana

Azafady mba hamarino tsara fa ao anaty fonosanao avokoa ireo entana rehetra voatanisa etsy ambany:

• 1x Alphacool DC-LT Ceramic 12 Volt Pump (Bulk Version)
• 2x M3x6 Allen Bolts
• Mounting Manual (this document)

Note: Mounting screws are not included with this bulk version pump. Additionally, this pump in its bulk version has no connection threads. It is recommended to order a suitable pump top from Alphacool's portfolio for proper installation and connection to your water cooling loop.

4. Torolàlana fananganana

Proper installation is crucial for the optimal performance and longevity of your Alphacool DC-LT pump. Follow these steps carefully:

1. Famoahana sy fisavana: Carefully remove the pump from its packaging. Inspect the pump for any visible damage that may have occurred during shipping.
2. Attaching a Pump Top/Reservoir: As this is a bulk version pump without integrated threads, you must attach a compatible Alphacool pump top or reservoir. This component provides the necessary inlet and outlet ports for your water cooling loop. Secure the pump to the chosen top/reservoir using the provided M3x6 allen bolts. Ensure a tight, secure fit to prevent leaks.
3. Fametrahana ny paompy: Mount the pump assembly securely within your PC case. Depending on your case and pump top, additional mounting hardware (e.g., M3x8mm screws for certain Alphacool products like the Repack – Dual DC-LT – 5.25 Single Bay station) may be required and is not included. Ensure the pump is mounted in a stable position to minimize vibrations.
4. Connecting to the Cooling Loop: Connect the inlet and outlet ports of the pump top to your water cooling loop components (radiator, CPU/GPU blocks, etc.) using appropriate fittings and tubing. Double-check all connections for tightness.
5. Fampifandraisana herinaratra: Connect the pump's 3-Pin fan plug to a compatible 3-Pin header on your motherboard or a fan controller. Ensure the connection is firm. The pump operates on 12V DC.
6. Filling the Loop: Fill your water cooling loop with a suitable coolant. It is recommended to use a funnel and fill slowly to avoid air bubbles. Ensure the reservoir (if used) is adequately filled.
7. Fitsapana leak: Before powering on your entire system, perform a thorough leak test. Power the pump independently (e.g., using a dedicated power supply or by shorting the ATX power supply's green and black wires) and let it run for several hours (e.g., 12-24 hours) while carefully inspecting all connections for any signs of leaks. Place paper towels or absorbent material under connections to easily spot drips.

Sary: akaiky view of the Alphacool DC-LT 3600 Ceramic Pump, showing the impeller and the compact housing. This image illustrates the core pump unit before a pump top or reservoir is attached.

5. Torolàlana miasa

Once the pump is properly installed and the loop is filled and leak-tested, you can begin operation:

• Herin'ny voalohany: After confirming no leaks, power on your system. The pump should start circulating the coolant immediately.
• Air Bleeding: During the first few hours of operation, you may hear gurgling noises as air bubbles are purged from the system. Gently tilt your PC case in different directions to help trapped air move to the reservoir. Continue to monitor coolant levels and top up as needed.
• BOKYtage Fanaraha-maso: The pump operates within a permitted voltage range of 5-13.5V DC. You can adjust the pump speed via your motherboard's fan control settings (if connected to a controllable header) or a dedicated fan controller. Lower voltages will result in quieter operation but reduced flow rate, while higher voltages increase flow rate and potentially noise.
• Fanaraha-maso: Regularly monitor your system's temperatures to ensure the water cooling loop is functioning effectively.

6. Fikojakojana

Regular maintenance helps ensure the longevity and efficiency of your water cooling system:

• Fanoloana rano mangatsiaka: It is recommended to replace the coolant in your loop every 6-12 months, or as recommended by your coolant manufacturer, to prevent buildup and maintain optimal performance.
• Fanadiovana ny rafitra: When replacing coolant, consider flushing the entire loop with distilled water to remove any old coolant residue or contaminants.
• Fanaraha-maso: Periodically inspect tubing, fittings, and the pump for any signs of wear, leaks, or blockages. Ensure all connections remain secure.
• Fanadiovana: If necessary, the pump can be disassembled (after draining the loop) for cleaning of the impeller and ceramic shaft. Refer to specific instructions for your pump top/reservoir for disassembly.

7. Famahana olana

If you encounter issues with your Alphacool DC-LT pump, refer to the following common problems and solutions:

• Tsy manomboka ny paompy:
  • Check the 3-Pin power connection to ensure it is securely seated on the motherboard header or controller.
  • Verify that the power supply is providing power to the motherboard/controller.
  • Ensure the motherboard BIOS settings or fan control software are not set to turn off the fan header at low temperatures.
• Fitabatabana be loatra:
  • The Alphacool DC-LT 3600 pump is known to produce a noticeable noise level, especially at higher voltages (25 dB at specified conditions). This is a characteristic of the 3600 RPM version.
  • Reduce the pump's operating voltage (e.g., to 7V or lower) via your motherboard's fan control settings or a fan controller. This will decrease the pump speed and noise, but also the flow rate.
  • Ensure the pump is securely mounted and not vibrating against the case or other components.
  • Check for air trapped in the loop, which can cause gurgling or cavitation noise. Bleed the system thoroughly.
• No Flow or Low Flow:
  • Check coolant level in the reservoir; ensure it is not too low.
  • Verify that there are no kinks or severe bends in the tubing restricting flow.
  • Ensure all fittings are open and not blocked.
  • An airlock might be present. Try tilting the system to dislodge air bubbles.
  • If the pump has been running dry, it may be damaged.
• Leak:
  • Immediately power down the system if a leak is detected.
  • Inspect all fittings and connections. Tighten any loose fittings.
  • Check O-rings and seals for damage or improper seating. Replace if necessary.
  • Ensure tubing is properly seated on barbs or compression fittings.

8. Famaritana

9. Warranty sy fanohanana

For warranty information and technical support regarding your Alphacool DC-LT 3600 Ceramic Pump, please refer to the official Alphacool webtranokala na mifandray mivantana amin'ny serivisy mpanjifany. Tehirizo ny porofon'ny fividiananao raha misy fitakiana fiantohana.