Intel DH55HC Desktop Motherboard User Manual

1. Fampidirana

This manual provides detailed instructions for the installation, operation, and maintenance of your Intel DH55HC Desktop Motherboard. Please read this manual thoroughly before beginning the installation process to ensure proper setup and optimal performance. The Intel DH55HC motherboard is designed to support Intel Core i3, Core i5, and Core i7 processors in an LGA 1156 socket, offering robust performance for desktop computing.

2. Endri-javatra fototra

• Socket CPU: LGA 1156, supporting Intel Core i5, Intel Core i7, and Intel Xeon processors.
• Chipset: Intel H55 Express Chipset.
• fahatsiarovana: Four DDR3 DIMM slots, supporting up to 16 GB of DDR3 1333 MHz memory.
• Slots fanitarana: Includes PCIe x16, PCIe x1, and PCI slots for various expansion cards.
• fitahirizana: Multiple SATA ports for connecting storage devices.
• Fifandraisana: Integrated Gigabit Ethernet, USB 2.0 ports, and audio jacks.
• Video Output: Integrated VGA and DVI ports for display connectivity.

3. Torolàlana fananganana

3.1. Unpacking the Motherboard

Carefully remove the motherboard from its packaging. Inspect the board for any visible damage. Ensure all accessories, such as SATA cables and the I/O shield, are present.

3.2. Famantarana singa

Familiarize yourself with the layout of the Intel DH55HC motherboard. The image below highlights key areas and connectors.

Sary 1: TAPITRAview of the Intel DH55HC Desktop Motherboard. This image displays the blue PCB with the LGA 1156 CPU socket at the center-left, four blue and white DDR3 RAM slots to its right, various expansion slots (PCIe x16, PCIe x1, PCI) on the lower right, and the rear I/O panel connectors on the left edge.

3.3. Fametrahana CPU

1. Tadiavo ny socket CPU LGA 1156 eo amin'ny motherboard.
2. Gently push down the load lever and pull it to the side to open the CPU socket cover.
3. Ampifanaraho amin'ny marika mifanaraka amin'izany eo amin'ny soketa ny marika telozoro eo amin'ny CPU. Apetraho tsara ao anaty soketa ny CPU nefa tsy terena.
4. Close the socket cover and push the load lever back into its locked position.
5. Apetaho amin'ny CPU ny paty thermique ary apetraho araka ny toromariky ny mpanamboatra azy ny fampangatsiahana ny CPU.

3.4. Fametrahana RAM

1. Locate the four DDR3 DIMM slots.
2. Sokafy ireo clip eo amin'ny andaniny roa amin'ny slot DIMM.
3. Ampifanaraho amin'ny fanalahidy ao amin'ny slot DIMM ny elanelana eo amin'ny môdio fahatsiarovana DDR3.
4. Ampidiro tsara ao anatin'ilay lavaka ny môdio fahatsiarovana mandra-piraikitra tsara ireo clip. Ataovy azo antoka fa mihidy tsara ireo clip roa ireo.

3.5. Storage Device Connection

1. Connect SATA data cables from your storage devices (HDD/SSD) to the SATA ports on the motherboard.
2. Connect the SATA power cables from your power supply to the storage devices.

3.6. Fifandraisana herinaratra

1. Ampifandraiso amin'ny lohateny mifanaraka amin'izany eo amin'ny motherboard ny connecteur herinaratra lehibe ATX 24-pin avy amin'ny famatsiana herinaratra anao.
2. Connect the 4-pin or 8-pin ATX 12V CPU power connector to the appropriate header near the CPU socket.

3.7. Fifandraisana eo amin'ny tontonana eo aloha

Connect the power button, reset button, HDD LED, power LED, and front panel USB/audio headers to their respective pins on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.

3.8. Fametrahana Karatra Fanitarana

Insert any necessary expansion cards (e.g., graphics card, sound card) into the appropriate PCIe x16, PCIe x1, or PCI slots. Secure them with screws to the chassis.

4. Torolàlana miasa

4.1. Fampidirana voalohany

After assembling all components, connect your monitor, keyboard, and mouse. Power on the system. The system should display the BIOS POST screen. If not, refer to the troubleshooting section.

4.2. Fametrahana BIOS/UEFI

During the POST process, press the designated key (usually do or F2) to enter the BIOS setup utility. Here you can configure boot order, system time, and other hardware settings. Save changes before exiting.

4.3. Fametrahana mpamily

After installing your operating system, install the necessary drivers for the chipset, audio, LAN, and any other integrated components. These drivers are typically provided on a support CD or can be downloaded from the Intel website.

5. Fikojakojana

5.1. Fanadiovana

Regularly clean dust from the motherboard and components using compressed air. Ensure the system is powered off and unplugged before cleaning. Avoid using liquids or abrasive materials.

5.2. Fanavaozana ny BIOS

Periodically check the Intel support website for BIOS updates. BIOS updates can improve system stability, add support for new hardware, or fix bugs. Follow the instructions provided by Intel carefully when performing a BIOS update to avoid system damage.

6. Famahana olana

• Tsy misy hery: Check all power connections (24-pin ATX, 4/8-pin CPU, power button header). Ensure the power supply is switched on.
• Tsy misy fampisehoana: Verify the monitor is connected and powered on. Reseat the graphics card (if applicable) and RAM modules. Check if the CPU is properly seated.
• Ny tsy fahatomombanan'ny rafitra/fianjerana: This could be due to overheating, faulty RAM, or an unstable power supply. Check CPU and GPU temperatures. Test RAM modules individually.
• Tsy mandeha ny Rafitra Fampiasana: Check boot order in BIOS. Ensure the storage drive with the OS is properly connected and functional.
• Olana amin'ny lafiny manodidina: Ensure drivers are installed correctly. Test peripherals on another system if possible.

7. Famaritana

8. Warranty sy fanohanana

For warranty information and technical support, please refer to the official Intel website or contact Intel customer service. Keep your proof of purchase for warranty claims. Support resources often include FAQs, driver downloads, and community forums.