Zurn Z812B4-XL-3F Brass Bathroom Faucet User Manual

Sava lalana

This manual provides detailed instructions for the installation, operation, and maintenance of your Zurn Z812B4-XL-3F Brass Bathroom Faucet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.

Information momba ny fiarovana

• Vonoy foana ny fantson-drano lehibe alohan'ny hametrahana na hanamboarana ny paompy.
• Manaova fitaovana fiarovana manokana, toy ny solomaso fiarovana, mandritra ny fametrahana.
• Raha tsy azonao antoka ny ampahany amin'ny fizotran'ny fametrahana, dia miresaha amin'ny plumber mahay.
• Do not overtighten connections, as this may cause damage to the faucet or plumbing.
• Ensure all local plumbing codes are followed during installation.

Fonosana fonosana

Hamarino fa misy ny singa rehetra alohan'ny hanombohan'ny fametrahana.

• Zurn Z812B4-XL-3F Centerset Faucet Body with Gooseneck Spout
• Two (2) Wrist Blade Handles (Hot and Cold)
• Fametrahana Hardware
• Gaskets and Seals
• Torolàlana fametrahana (ity boky ity)

Image: Zurn Z812B4-XL-3F Brass Bathroom Faucet. This image displays the complete faucet assembly, featuring a polished chrome finish, a high-arc gooseneck spout, and two wrist blade handles for hot and cold water control. The base is designed for a centerset installation.

Fitaovana ilaina

The following tools are typically required for faucet installation:

• Wrench azo zahana
• Basin Wrench (optional, but recommended for tight spaces)
• Phillips Head Screwdriver
• Putty na tombo-kase silikônina ho an'ny mpanao asa tanana
• jiro
• Teflon Tape (thread seal tape)
• Siny sy lamba famaohana

Fametrahana (Fametrahana)

Follow these steps for proper installation of your Zurn Z812B4-XL-3F faucet. Refer to local plumbing codes for specific requirements.

1. Omano ny lavenona (Prepare the Sink): Ensure the sink surface is clean and free of debris. If replacing an old faucet, remove it and clean the mounting area thoroughly.
2. Vonoy ny famatsiana rano: Locate the main water shut-off valve for your home or the shut-off valves under the sink. Turn them off completely. Open the existing faucet to drain any remaining water from the lines.
3. Mametraka ny Vatan'ny Paompy:
   • Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet body where it will meet the sink surface.
   • Insert the faucet body through the holes in the sink or countertop. Ensure the hot and cold inlets align with the corresponding supply lines.
   • From underneath the sink, secure the faucet body using the provided mounting hardware (washers and nuts). Hand-tighten first, then use an adjustable wrench to snug the nuts, being careful not to overtighten.
4. Mampifandray tsipika famatsian-drano:
   • Wrap Teflon tape around the threaded ends of the faucet's hot and cold water inlets.
   • Connect the hot water supply line to the hot inlet (typically on the left) and the cold water supply line to the cold inlet (typically on the right).
   • Tighten connections with an adjustable wrench. Do not overtighten.
5. Mametraka tantana: Attach the wrist blade handles to their respective valve stems. Ensure the hot handle is on the left (red indicator) and the cold handle is on the right (blue indicator). Secure them according to the specific design (e.g., with a set screw).
6. Fitsapana ho an'ny leak:
   • Alefaso tsikelikely ny famatsian-drano lehibe.
   • Check all connections for leaks. If leaks are present, tighten the connection slightly until the leak stops. Do not overtighten.
   • Open both hot and cold handles to flush the lines and check for proper water flow.

Torolàlana miasa

The Zurn Z812B4-XL-3F faucet features two wrist blade handles for precise control of water temperature and flow.

• Rano mangatsiaka: Turn the right handle (blue indicator) counter-clockwise to open for cold water flow. Turn clockwise to close.
• Rano mafana: Turn the left handle (red indicator) counter-clockwise to open for hot water flow. Turn clockwise to close.
• Fanaraha-maso ny maripana: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
• Fanaraha-maso ny fikorianan'ny rano: Arakaraka ny ahodin'ny tahony no vao mainka mikoriana ny rano.

fikarakarana

Ny fanadiovana sy fikojakojana tsy tapaka dia hanampy amin'ny fiarovana ny endrika sy ny fiasan'ny paompyo.

• Fanadiovana ny famaranana: Diovy amin'ny lamba malefaka sy madio ny chrome voapolokaamp cloth and mild soap. Rinse thoroughly and dry with a soft cloth to prevent water spots. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Aerator Maintenance: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the tip of the spout, clean any debris or mineral deposits, and rinse thoroughly before reattaching.
• Fisorohana ny leak: Periodically check under the sink for any signs of leaks. Address small leaks promptly to prevent larger issues.

Fanamboarana

fepetra arahana

Warranty sy fanohanana

For warranty information or technical support regarding your Zurn Z812B4-XL-3F faucet, please contact Zurn customer service directly. Details can typically be found on the official Zurn website or through your product's purchase documentation.

Mpanamboatra: Zurn

Webtranokala: www.zurn.com (Note: This is a general link and may not lead directly to product support.)