1. Fampidirana
This manual provides essential information for the safe and efficient operation of your Hitachi CP-X2511 Projector. Please read it thoroughly before using the projector and keep it for future reference. The Hitachi CP-X2511 is designed for clear and bright presentations, featuring 2,700 ANSI Lumens, Native XGA Resolution, and a 2000:1 Contrast Ratio.
2. Information momba ny fiarovana
- Herin'aratra: Ampiasao fotsiny ny famatsiana herinaratra voafaritra voltage. Ensure the power cord is securely connected and not damaged.
- rivotra: Do not block the ventilation openings. Adequate airflow is crucial to prevent overheating.
- Lamp: Ny projector lamp operates at high temperatures and pressures. Allow the projector to cool down before moving or performing maintenance. Do not look directly into the lens when the lamp mandeha.
- Fametrahana: Place the projector on a stable, level surface. Avoid locations with excessive dust, humidity, or extreme temperatures.
- Serivisy: Do not attempt to service the projector yourself. Refer all servicing to qualified service personnel.
3. Ny votoatin'ny fonosana
Hamarino fa ny entana rehetra voatanisa etsy ambany dia tafiditra ao anatin'ny fonosanao:
- Hitachi CP-X2511 Projector Unit
- Fanaraha-maso lavitra
- Cable VGA
- Cable herinaratra
Figure 3.1: Projector and included accessories, including the remote control, VGA cable, and power cable.
4. Vokatra mihoatraview
4.1 Eo anoloana sy Ambony Views
Sary 4.1: Eo anoloana sy ilany view of the projector, highlighting the lens and air vents.
Sary 4.2: Ambony view of the projector, displaying the control panel and status indicators.
4.2 Panel fanaraha-maso
The control panel on the top of the projector provides access to essential functions:
- Bokotra MIANDRY/MISY: Mampandeha na mamono ny projecteur.
- bokotra INPUT: Selects the input source (e.g., Computer, Video).
- Bokotra MENU: Opens the on-screen display (OSD) menu.
- Bokotra Fitetezana (Miakatra, Midina, Havia, Havanana): Ampiasaina hivezivezena amin'ireo safidy ao amin'ny menio sy hanitsiana ny fikirana.
4.3 Jiro famantarana
The projector features several indicator lights to show its status:
- LAMP: Indicates lamp sata.
- Temp: Warns of high internal temperature.
- HERY: Shows the power status (on, standby, cooling).
4.4 Seranana fifandraisana
The projector offers various input and output ports for connecting external devices:
- RGB In (x2): For connecting computers or other devices with VGA output.
- RGB Out (x1): For connecting to an external monitor.
- Video mitambatra: For standard video input.
- S-Video: For enhanced video input.
- Audio miditra/ mivoaka: Ho an'ny fifandraisana audio.
Sary 4.3: lafiny view of the projector, illustrating the array of input and output ports.
Sary 4.4: lafiny view of the projector, showing the ventilation grilles for heat dissipation.
Sary 4.5: Ambany view of the projector, featuring the product label with model and electrical details.
5. Fametrahana
5.1 Fametrahana
Consider the following when positioning your projector:
- Distance projection: Adjust the distance from the screen to achieve the desired image size.
- zoro: Ensure the projector is as perpendicular to the screen as possible to minimize keystone distortion.
- Tontolo iainana: Avoid direct sunlight or strong artificial light sources that could wash out the image.
5.2 Fitaovana mampifandray
- Mampifandray Loharanon-tsary: Use the appropriate cable (VGA, Composite, or S-Video) to connect your computer, DVD player, or other video source to the projector's input ports.
- Connect Audio (tsy voatery): If your source device has separate audio output and you wish to use the projector's internal speaker or an external audio system, connect an audio cable to the projector's audio input.
- Hery mampifandray: Plug the power cable into the projector's AC inlet and then into a wall outlet.
6. Torolàlana miasa
6.1 Mamelona/Mamono
- Hamelona: Press the STANDBY/ON button on the control panel or remote control. The POWER indicator will turn green.
- Mamono: Press the STANDBY/ON button again. The projector will enter a cooling cycle, and the POWER indicator may flash. Do not unplug the projector until the cooling cycle is complete.
6.2 Fifantenana ny Loharano Fidirana
Press the INPUT button on the control panel or remote control repeatedly to cycle through the available input sources (e.g., Computer 1, Computer 2, Video, S-Video).
6.3 Basic Image Adjustments
- mifantoka: Ahodino ny peratra fifantohana eo amin'ny family mandra-pahazava tsara ny sary.
- Zoom: Rotate the zoom ring on the lens to adjust the image size.
- Fanitsiana Keystone: The projector features Auto V Keystone correction. If manual adjustment is needed, use the menu options to correct trapezoidal distortion.
- Audio: The projector has a 16W speaker output and supports audio pass-through. Adjust volume via the remote or source device.
7. Fikojakojana
7.1 Lamp fanoloana
Ny lamp life is approximately 6,000 hours in Eco Mode. When the lamp tonga amin'ny faran'ny fiainany, ny LAMP indicator will illuminate or flash. Refer to the full service manual for detailed lamp replacement instructions. Always use a genuine Hitachi replacement lamp.
7.2 Fanadiovana/Fanoloana Sivana
The projector features an easily accessible hybrid filter with an approximate life of 5,000 hours between maintenance. Regularly clean the filter to ensure optimal airflow and prevent overheating. Replace the filter when necessary, following the instructions in the full service manual.
7.3 Fanadiovana ankapobeny
- Lens: Gently wipe the lens with a soft, lint-free cloth designed for optical surfaces.
- Casing: Use a soft, dry cloth to clean the projector casing. Aza mampiasa mpanadio na solvents mikikisana.
8. Famahana olana
If you encounter issues with your projector, consult the following common problems and solutions:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy misy sary naseho | Loharano fampidirana diso nofantenana | Press the INPUT button to select the correct source. |
| Tsy misy sary naseho | Video cable not connected properly | Check and secure all video cable connections. |
| Manjavozavo ny sary | Lens out of focus | Ahitsio ny peratra fifantohana amin'ny family. |
| Projector overheats / TEMP indicator on | Blocked ventilation or dirty filter | Ensure vents are clear. Clean or replace the air filter. |
| Tsy mandeha ny fanaraha-maso lavitra | Batterie maty na sakana | Replace batteries. Ensure no objects block the signal path to the projector. |
9. Famaritana
| endri-javatra | famaritana |
|---|---|
| Laharana modely | CP-X2511 |
| ny famirapiratry ny mazava | 2,700 XNUMX ANSI Lumens |
| Native Resolution | XGA (1024 x 768) |
| Contrast Ratio | 2000:1 (Using Active IRIS) |
| Lamp Fiainana | Approx. 6,000 Hours (Eco Mode) |
| Fiainana sivana | Approx. 5,000 Hours (between maintenance) |
| Output Speaker | 16W |
| Fanjifana herinaratra | 0.5 watt (power saving mode using 120V) |
| fifandraisana | 2 RGB In, 1 RGB Out, Composite, S-Video |
| Haben'ny vokatra (W x D x H) | 12.5 x 11.3 x 3.9 santimetatra |
| Lanja entana | 8.2 kg |
| Endri-javatra manokana | Instant On/Off, Security Bar, Transition Detector, Digital Gamma Correction, Whiteboard/Blackboard Mode, Input Source Naming, MyMemory/MyScreen/MyButtons/MyText, Auto V Keystone |
10. Warranty sy fanohanana
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Hitachi website. Keep your purchase receipt as proof of purchase for warranty claims. Do not attempt to repair the product yourself, as this may void your warranty.