Sava lalana
This manual provides essential information for the proper handling, installation, and maintenance of your Eagle Specialty Products CRS5483F3D H-Beam Connecting Rod Set. These connecting rods are engineered for high-performance automotive applications, specifically designed for Ford 1.9L and 2.0L Zetec engines. Adherence to these instructions will ensure optimal performance and longevity of the product.

Image: A set of four Eagle Specialty Products CRS5483F3D H-Beam Connecting Rods, showcasing their robust construction and precision machining. Each rod features a large end for the crankshaft and a small end with a bronze bushing for the piston pin, along with two bolt holes for the rod cap.
Vita ny vokatraview ary Features
The Eagle ESP H-beam connecting rods are part of a lightweight series, designed to reduce rotating mass for enhanced high-RPM performance. Key features include:
- Fanorenana: 2-piece, forged, vacuum-degassed, 4340-certified steel for superior strength.
- Heat Treatment: Multi-stage heat-treated for improved durability.
- Fiantohana kalitao: Each rod is X-rayed, sonic-tested, magnafluxed, 100% machined, and shot-peened to stress-relieve the metal.
- Fasteners: Equipped with stout 3/8" ARP 2000 cap screw attachments.
- Ahitsio Precision cap alignment sleeves ensure positive location of each rod cap.
- Pin Fit: Bushed pin fit for optimal piston pin movement.
Famaritana ara-teknika
| famaritana | sarobidy |
|---|---|
| Laharan'ny ampahany | CRS5483F3D |
| KEVITRA | 4340 Forged Steel |
| Rod Length (Center to Center) | 5.483 santimetatra |
| Rod Journal Diameter | 1.847 santimetatra |
| Housing Bore Diameter | 1.9650 santimetatra |
| Piston Pin Size | 0.788 santimetatra |
| Big End Width | 0.9560 santimetatra |
| Pin End Width | 0.8020 santimetatra |
| Thickness Above Pin | 0.200 santimetatra |
| Typical Weight (per rod) | 535 grama |
| Karazana Fastener | 3/8" ARP 2000 |
| Recommended Fastener Torque | 43 ft-lbs (with ARP moly lube on threads) |
| Fampiharana | Ford 1.9L & 2.0L Zetec Engines |
| Set Quantity | 4 Rods |
| Lanja fonosana | 6 kg |
| Haben'ny vokatra (eo ho eo) | 12 x 6 x 6 santimetatra |
Fametrahana sy fametrahana
Installation of connecting rods requires specialized knowledge and tools. It is highly recommended that installation be performed by a qualified automotive technician. Incorrect installation can lead to severe engine damage.
Fanamarinana mialoha ny fametrahana:
- Fanaraha-maso: Carefully inspect each connecting rod for any signs of shipping damage or manufacturing defects.
- Fanadiovana: Thoroughly clean all components to remove any protective coatings or debris.
- fandrefesana: Verify all critical dimensions (length, journal diameter, bore, pin size) against the specifications provided in this manual using precision measuring tools.
- Fasteners: Ensure the ARP 2000 fasteners are clean and apply ARP moly lube to the threads and under the head of the bolts before assembly.
Dingana fametrahana (Torolàlana ankapobeny):
- Assemble the connecting rod to the piston using the appropriate piston pin and retainers. Ensure the pin fit is correct (bushed).
- Install the connecting rod bearings into the rod and cap, ensuring they are clean and properly seated.
- Lubricate the crankshaft journals and connecting rod bearings with clean engine assembly lubricant.
- Carefully install the piston and connecting rod assembly into the engine block, guiding the rod onto the crankshaft journal.
- Install the connecting rod cap, ensuring the precision alignment sleeves correctly locate the cap.
- Install the ARP 2000 fasteners and torque them to the recommended 43 ft-lbs using a calibrated torque wrench, following the manufacturer's specified tightening sequence (typically in stages).
- Verify proper rod side clearance and crankshaft rotation after each rod assembly.
Note: Always refer to your specific engine's service manual for detailed installation procedures, clearances, and torque specifications.
Hevitra momba ny asa
Once installed, these connecting rods are designed to operate within the engine's normal parameters, including high-RPM applications. Proper engine break-in procedures, as outlined by your engine builder or vehicle manufacturer, are crucial after any internal engine work. Ensure the engine's lubrication system is functioning optimally, and use high-quality engine oil suitable for performance applications.
- fanosorana: Maintain adequate oil levels and use the recommended oil type for your engine.
- Fanaraha-maso: Regularly monitor engine oil pressure and temperature.
- Fanitsiana ny Fahombiazana: For high-performance applications, ensure engine tuning (fuel, ignition timing) is optimized to prevent detonation, which can severely damage internal components.
fikarakarana
The Eagle H-Beam connecting rods themselves require no routine maintenance once installed. However, the longevity and performance of the rods are directly dependent on the overall health and maintenance of the engine.
- Fanovana menaka: Adhere to a strict schedule for oil and filter changes using high-quality lubricants.
- Fahasalaman'ny motera: Regularly check for proper engine operation, including coolant levels, fuel system integrity, and ignition system performance.
- Fanaraha-maso ara-potoana: During any major engine service or rebuild, inspect the connecting rods for wear, especially on the bearing surfaces and pin bores. Check fastener torque if accessible and recommended by a professional.
Fanamboarana
Issues related to connecting rods typically manifest as severe engine noises (knocking, rattling), loss of oil pressure, or catastrophic engine failure. Due to the critical nature of these components, any suspected issue with connecting rods requires immediate professional diagnosis and repair.
- Engine Knocking/Rattling: This can indicate bearing wear, improper clearances, or a damaged rod. Immediately cease engine operation and seek professional inspection.
- Tsindry menaka ambany: While many factors can cause low oil pressure, severe bearing wear on connecting rods can contribute. Address low oil pressure promptly.
- Engine Seizure: A seized engine can be a symptom of catastrophic connecting rod failure. This requires a complete engine rebuild.
Warning: Do not attempt to operate an engine with suspected connecting rod issues. This can lead to irreversible damage to the engine block, crankshaft, and other components.
Warranty sy fanohanana
For information regarding warranty coverage, claims, or technical support for your Eagle Specialty Products CRS5483F3D H-Beam Connecting Rod Set, please contact Eagle Specialty Products directly or the authorized dealer from whom you purchased the product. Keep your proof of purchase for any warranty inquiries.
Mpanamboatra: Eagle Specialty Products
Antsipiriany ifandraisana: Please refer to the official Eagle Specialty Products webtranonkala na ny fonosan'ny vokatrao raha mila ny antsipirian'ny fifandraisana farany indrindra.





