Sava lalana
This instruction manual provides essential information for the proper setup, operation, and maintenance of your Yamaha WS-904A Heavy Duty Tom Stand with 3-Hole Receiver, 900 Series. This professional-grade double tom stand is engineered for reliability, durability, and versatility, utilizing Yamaha's renowned manufacturing processes. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
Information momba ny fiarovana
- Always ensure all clamps and fasteners are securely tightened before use to prevent instruments from falling.
- Do not exceed the weight capacity of the stand. Overloading can cause instability and damage.
- Apetraho eo amin'ny toerana milamina sy marin-toerana ny fitoeran-javatra mba tsy hivadika.
- Keep hands and fingers clear of moving parts during adjustment to avoid pinching.
- Regularly inspect the stand for any signs of wear, damage, or loose components. Do not use if damaged.
Fonosana fonosana
Hamarino fa misy ny singa rehetra ao anaty fonosana:
- 1 x Yamaha WS-904A Heavy Duty Tom Stand (900 Series)
- 1 x 3-Hole Receiver
- Note: CLs (Tom Holders/Clamps) are not included and must be purchased separately.
Hametraka
Follow these steps to set up your tom stand:
- Avelao ny tongotra: Carefully unfold the double-braced legs of the stand until they are fully extended and stable. Ensure the stand is placed on a flat, level surface.
- Ahitsio Haavo: Esory ny fanitsiana ny haavony clamp on the main shaft. Extend or retract the upper section to your desired height. This stand is designed to go lower than many other Yamaha double tom stands, making it ideal for hanging floor toms. Tighten the clamp securely once the desired height is achieved.
- Attach the 3-Hole Receiver: The 3-hole receiver is designed to accept compatible tom holders or cymbal arms (not included). Insert the receiver into the top tube of the stand and secure it with the provided clamp.
- Mount Toms/Cymbals: Insert your tom holders or cymbal arms into the holes of the receiver. Adjust their positions and angles as needed, then tighten their respective clamps to secure them firmly.
Image: The Yamaha WS-904A Heavy Duty Tom Stand with its double-braced legs and 3-hole receiver. This image shows the stand fully assembled and ready for tom holders.
Torolàlana miasa
Once the stand is set up and your instruments are mounted, ensure all adjustments are secure. Periodically check the stability of the stand during use, especially if making dynamic movements or playing vigorously. The heavy-duty construction and double-braced legs provide excellent stability for multiple drums and cymbals.
- Adjusting Tom/Cymbal Position: Esory ny clamp on the 3-hole receiver or the individual tom/cymbal arm to reposition. Re-tighten firmly once adjusted.
- Fanamarinana ny fahamarinan-toerana: Before each playing session, gently shake the stand to confirm all components are tight and the stand is stable.
fikarakarana
Proper maintenance will extend the life of your tom stand:
- Fanadiovana: Wipe down the stand with a soft, dry cloth after each use to remove dust and fingerprints. For stubborn grime, use a slightly damp cloth and dry thoroughly. Avoid abrasive cleaners.
- fanosorana: Periodically apply a small amount of silicone-based lubricant to the moving parts, such as the height adjustment mechanism, to ensure smooth operation.
- Fanaraha-maso: Regularly check all screws, bolts, and clamps for tightness. Tighten any loose fasteners to prevent wobbling or component failure. Inspect rubber feet for wear.
- fitahirizana: When not in use, collapse the stand and store it in a dry, temperate environment to prevent rust and damage.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Mihozongozona na tsy milamina ny stand. | Legs not fully extended; clamps not tightened; uneven surface. | Ensure legs are fully spread. Tighten all clamps. Move stand to a level surface. |
| Tom/cymbal holder slips. | Clamp not tight enough; excessive weight. | Hamafiso indray ny clamp firmly. Ensure the instrument's weight does not exceed the holder's capacity. |
| Sarotra ny manitsy ny haavony. | Clamp too tight; dirt/grime in the shaft; lack of lubrication. | Esory ny clamp. Clean the shaft and apply a small amount of lubricant. |
fepetra arahana
- Modely: WS-904A
- Andiany: 900 Series
- Karazana: Heavy Duty Tom Stand with 3-Hole Receiver
- Karazana fototra: Double-braced legs
- Lanja entana: 11.15 kilao (5.06 kg)
- Ny haben'ny vokatra (L x W x H): 25.2 x 7.68 x 6.89 santimetatra (64.0 x 19.5 x 17.5 cm)
- Ilaina ny fivoriambe: No (Stand comes pre-assembled)
- UPC: 086792892832
Warranty sy fanohanana
antoka: This Yamaha WS-904A Heavy Duty Tom Stand is covered by a Warranty 5 taona manomboka amin'ny datin'ny fividianana. Ity fiantohana ity dia manarona ny lesoka amin'ny famokarana sy ny lesoka ara-pitaovana amin'ny fampiasana mahazatra. Azafady, tehirizo ny porofon'ny fividiananao ho an'ny fitakiana fiantohana.
Fanohanana: For technical assistance, spare parts, or warranty service, please contact Yamaha customer support through their official website or authorized service centers. Refer to the official Yamaha webtranonkala hahazoana ny fampahalalana farany indrindra momba ny fifandraisana sy ny loharanom-pahalalana momba ny fanohanana.