1. Fampidirana
This manual provides detailed instructions for the installation, operation, and maintenance of your Arc Audio FD2200 2-Channel Car Amplifier. Please read this manual thoroughly before attempting to install or operate the amplifier to ensure proper function and safety.
2. Information momba ny fiarovana
Tandremo hatrany ireto fepetra fiarovana manaraka ireto:
- Esory ny bateria amin'ny fiara alohan'ny hanaovana fifandraisana elektrika.
- Ataovy azo antoka fa mandeha tsara sy voaaro tsara ny tariby rehetra mba hisorohana ny fahasimbana na ny circuit short.
- Aza apetraka ny ampLifier ao amin'ny toerana misy tara-masoandro mivantana, hafanana be loatra, hamandoana na vovoka.
- Ampiasao tariby sahaza ho an'ny fifandraisana amin'ny herinaratra sy amin'ny tany mba hisorohana ny hafanana be loatra.
- Consult a professional installer if you are unsure about any aspect of the installation.
3. Vokatra mihoatraview
The Arc Audio FD2200 is a high-performance 2-channel car amplifier designed to deliver clear and powerful audio. It features robust construction and advanced protection circuits.
Image 1: Arc Audio FD2200 2-Channel Car Amplifier. This image displays the top view ny amplifier, fampisehoanacasing its black and silver casing with the Arc Audio logo and model number.
Lafin-javatra fototra:
- 12dB stereo crossover with x10 range switch (55Hz to 5.5KHz)
- High/low/full range selector switch
- Mono/stereo/bridged select feature
- 18dB bass control at 45Hz
- Protection against reverse voltage, mihoatra ny voltage, speaker short, and thermal overload
- Fanamboarana adidy mavesatra
4. Fametrahana sy fametrahana
Ny fametrahana araka ny tokony ho izy dia tena ilaina amin'ny fampandehanana tsara indrindra sy ny fiarovana. Manoro hevitra ny hanana izany amplifier napetraky ny matihanina mahay.
4.1 Toerana fametrahana
Misafidiana toerana fametrahana izay:
- Maina ary mahazo rivotra tsara.
- Protected from direct sunlight and excessive heat.
- Secure and free from vibrations.
- Accessible for wiring and adjustments.
4.2 Fifandraisana tariby
Araho ireto torolàlana ireto ho an'ny fifandraisana elektrika:
- Hery (B+): Connect a fused power cable directly from the positive terminal of the vehicle's battery to the amplifier's B+ terminal. Ensure the fuse is located within 18 inches of the battery.
- tany (GND): Ampifandraiso amin'ny tariby fohy sy matevina ny tariby tany avy amin'ny amplifier's GND terminal to a clean, unpainted metal surface on the vehicle's chassis.
- Lavitra (REM): Ampifandraiso amin'ny tariby fampandehanana lavitra avy amin'ny output lavitra an'ny head unit-nao ny ampny terminal REM an'ny lifier.
- RCA Inputs: Ampifandraiso ny tariby RCA avy amin'ny lohanao alohan'nyamp vokatra ho an'ny ampireo jack fidirana RCA an'ny lifier.
- Fivoahan'ny mpandahateny: Connect speaker wires from the amplifier's speaker terminals to your speakers. Observe correct polarity (+ to + and - to -).
5. Torolàlana miasa
Rehefa tafapetraka, ny amplifier requires proper configuration for optimal audio performance.
5.1 Mahazoa fanitsiana
Mifanaraka amin'ny amplifier's input sensitivity to the output of your head unit. Start with the gain set to minimum and slowly increase it until you hear distortion, then back off slightly.
5.2 Crossover Settings
Use the 12dB stereo crossover with the x10 range switch to set the desired frequency range for your speakers. The high/low/full range selector switch allows you to choose the appropriate mode:
- Pass ambony: Filters out low frequencies, suitable for full-range speakers or tweeters.
- Pass ambany: Filters out high frequencies, suitable for subwoofers.
- Sarona feno: Allows all frequencies to pass through, typically used for full-range speakers without a separate subwoofer.
5.3 Bass Boost
The 18dB bass control at 45Hz can be used to enhance low-frequency output. Use this feature sparingly to avoid distortion and potential speaker damage.
5.4 Mono/Stereo/Bridged Select
This switch allows you to configure the amplifier for different output modes:
- Stereo: Standard 2-channel operation for two speakers.
- Mono: Combines both channels into a single output, typically for a single subwoofer.
- Tetezana: Combines the power of both channels into a single, higher-power output, usually for a single, high-power subwoofer. Refer to the specifications for bridged power output.
6. Fikojakojana
The Arc Audio FD2200 ampMila fikojakojana kely ny lifier mba hiantohana ny fampandehanana maharitra.
- Tazony ny ampMadio sy tsy misy vovoka ary loto ny fitaovana fanadiovana. Mampiasà lamba malefaka sy maina hanadiovana.
- Ataovy azo antoka tsara ny rivotra manodidina ny ampfitaovana fampangatsiahana mba hisorohana ny hafanana be loatra. Aza sakanana ny vombony fampangatsiahana.
- Hamarino tsindraindray ny fifandraisana amin'ny tariby rehetra sao henjana sy harafesina.
7. Famahana olana
Raha sendra olana amin'ny tenanao ianao amplifier, jereo ireto olana sy vahaolana mahazatra manaraka ireto:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy misy hery/tsy misy feo | Blown fuse, loose power/ground/remote wire, ampLifier amin'ny fomba fiarovana. | Check fuses (battery and amplifier). Verify all power, ground, and remote connections are secure. Check for short circuits in speaker wiring. |
| Feo diso | Avo loatra ny gain set, tsy mety ny fametrahana ny crossover, ary tsy dia tsara ny kalitaon'ny signal input. | Reduce gain. Adjust crossover settings. Check RCA cables for damage. |
| Amplifier Mihoatra ny hafanana | Inadequate ventilation, impedance too low, prolonged high-power operation. | Ataovy izay hahazoana antoka fa mandeha tsara ny fikorianan'ny rivotra manodidina amplifier. Hamarino ny fifanandrifian'ny fanoherana ny fanamafisam-peo amplifier capabilities. Reduce volume or operating time. |
| Noise/Hissing | Ground loop, poor quality RCA cables, improper gain setting. | Ensure a solid ground connection. Use shielded RCA cables. Adjust gain. |
If the problem persists after attempting these solutions, contact Arc Audio customer support or a qualified service technician.
8. Famaritana
The following are the technical specifications for the Arc Audio FD2200 ampLitera:
- Hery mivoaka (RMS):
- 100 Watts x 2 @ 4 ohms
- 185 Watts x 2 @ 2 ohms
- 360 Watts x 1 @ 4 ohms (bridged)
- Transient Distortion: <0.1% @ 4 ohms
- Valiny matetika: 20Hz - 20KHz
- Signal-to-Noise Ratio (A-weighted): >98dB
- Fampiroboroboana Bass: +18dB @ 45Hz
- Fahatsapan'ny fidirana: 250mV - 2.5V
- Crossover: 55Hz - 5.5KHz variable 12dB
- Fuse: 45A x 1
- Dimensions (with endcaps): 10 3/8" x 16 3/4" x 2 3/8"
- Dimensions (without endcaps): 10 3/8" x 13 1/2" x 2 3/8"
- Lanja entana: 12 kg
- BOKYtage: 12 Volts (DC)
9. Warranty sy fanohanana
Arc Audio products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Arc Audio website. For technical support or service inquiries, please contact Arc Audio customer service directly.
Antsipiriany ifandraisana:
- Webtranokala: www.arcaudio.com (Eksample rohy, ny tena rohy mety miovaova)
- Serivisy ho an'ny mpanjifa: Jereo ny website for current contact methods.
