1. Fampidirana
The Fantech WC 15 is a rotary type variable speed controller designed to provide precise control over the speed of compatible fans and motors. It includes an integrated on/off switch for convenient operation. This manual provides essential information for the safe installation, operation, and maintenance of your WC 15 speed control.
2. Information momba ny fiarovana
Tandremo hatrany ireto fepetra fiarovana manaraka ireto mba hampihenana ny mety hisian'ny afo, fahatafintohinana herinaratra, na ratra:
- FAMPITANDREMANA: Disconnect power at the circuit breaker or fuse box before installing or servicing the control.
- Ny fametrahana dia tsy maintsy ataon'ny elektrisianina mahafeno fepetra mifanaraka amin'ny kaody elektrika rehetra eo an-toerana sy nasionaly.
- Do not exceed the specified electrical ratings of 120V and 5 Amp.
- Ataovy azo antoka fa voaaro tsara ny fifandraisana amin'ny tariby rehetra.
- Do not operate the control with wet hands or in damp fepetra.
- This control is designed for indoor use only.
3. Ny votoatin'ny fonosana
Hamarino fa misy ny entana rehetra ao anaty fonosana:
- Fantech WC 15 Speed Controller
- Brushed Aluminum Switch Plate
- Fametrahana screws
4. Fametrahana sy fametrahana
The Fantech WC 15 speed control is designed to fit a standard single gang electrical box. Follow these steps for proper installation:
- Vonoy ny herinaratra: Locate the circuit breaker or fuse that supplies power to the area where the control will be installed and turn it off. Verify that power is off using a voltage tester.
- Manomana tariby: Carefully remove the existing wall plate and switch, if any. Identify the line (incoming power) and load (to fan/motor) wires.
- mampifandray tariby: Connect the wires from the WC 15 control to your electrical system. The control typically has two red wires for power connection and one green wire for ground. Connect one red wire to the incoming line wire and the other red wire to the load wire leading to the fan/motor. Connect the green wire to the ground wire in the electrical box. Ensure all connections are tight and secure.
- Mametraka ny fanaraha-maso: Gently push the wired control into the electrical box. Secure it using the provided mounting screws.
- Install faceplate: Attach the brushed aluminum switch plate over the control and secure it with its screws.
- Avereno hery: Avereno indray ny herinaratra eo amin'ny fiatoan'ny faritra na ny boaty fuse.
Image: The Fantech WC 15 Speed Control, showing the grey faceplate with a black rotary knob, labeled 'Vati-Speed', 'HIGH', and 'OFF'. Red and green wires extend from the back of the unit, indicating connections for power and ground.
5. Torolàlana miasa
The Fantech WC 15 features a simple rotary knob for operation:
- Fampiasana on/off: Rotate the knob fully counter-clockwise until it clicks to turn the connected device OFF. Rotate it clockwise from the OFF position to turn the device ON.
- Fanaraha-maso ny hafainganam-pandeha: Once the device is ON, continue rotating the knob clockwise to increase the speed, and counter-clockwise to decrease the speed. The knob is marked with 'HIGH' to indicate the maximum speed setting.
- Low Speed Adjustment (WC15H model specific): For WC15H (4-wire) models, there is an additional feature for high-speed bypass and a low-speed adjustment. Refer to the specific technical specification for the WC15H if applicable. The standard WC 15 allows for variable speed control within its range.
6. Fikojakojana
The Fantech WC 15 speed control requires minimal maintenance:
- Fanadiovana: Periodically wipe the surface of the control and faceplate with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Fanaraha-maso: Occasionally inspect the control for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
7. Famahana olana
If you experience issues with your Fantech WC 15 speed control, refer to the following common problems and solutions:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Control does not turn on or operate. | No power to the control; loose wiring; faulty control. | Check circuit breaker/fuse. Verify wiring connections. If issues persist, consult an electrician or Fantech support. |
| Fan/motor hums or makes unusual noise at certain speeds. | Incompatibility with motor type; electrical interference. | Ensure the control is compatible with your motor type. Some motors may produce slight humming with speed controls. If excessive, consult Fantech support. |
| Speed control is inconsistent or erratic. | Overload; faulty control. | Ensure the connected load does not exceed 5 Amp. If the problem continues, the control may be faulty and require replacement. |
8. Famaritana
- Modely: wc 15
- Karazana: Rotary Variable Speed Controller with On/Off Switch
- BOKYtage: 120V
- Ampfandravana: 5 Amp
- refy: Manodidina ny 3 x 2 x 5 santimetatra
- Lanja: Tokony ho 4.16 ounces
- mifanentana: Fits standard single gang box
- Mpanamboatra: Fantech
- Firenena nihaviana: Hong Kong
9. Warranty sy fanohanana
For warranty information or technical support, please contact Fantech directly or refer to their official website. Tehirizo ny tapakila fividiananao ho porofon'ny fividianana ho an'ny fitakiana fiantohana.
Fantech Contact Information:
- Tsidiho ny FANTECH Store on Amazon Raha mila fanazavana fanampiny sy safidy hifandraisana.
