Chicago Pneumatic CP874 Air Cut-Off Tool Instruction Manual

Sava lalana

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Chicago Pneumatic CP874 Air Cut-Off Tool. Please read this manual thoroughly before using the tool and retain it for future reference. The CP874 is designed for cutting various materials such as sheet metal, fiberglass, bolts, muffler clamps, and hangers, as well as grinding burrs and rough edges.

Image: Chicago Pneumatic CP874 Air Cut-Off Tool, a red and black pneumatic tool with a cutting wheel guard.

Information momba ny fiarovana

Always observe general safety precautions when operating power tools. Failure to follow these instructions may result in serious injury.

• Fitaovana fiarovana manokana (PPE): Always wear eye protection (safety glasses or goggles), hearing protection (earplugs or earmuffs), and appropriate hand protection (gloves) when operating the tool. A dust mask is recommended when cutting materials that produce fine particles.
• Toeram-piasana: Ensure your work area is clean, well-lit, and free from obstructions. Keep bystanders, especially children, away from the operating area.
• Famatsiana rivotra: Ensure the air supply is clean, dry, and regulated to the specified pressure. Do not exceed the maximum operating pressure.
• Toe-javatra fitaovana: Inspect the tool and cutting wheel before each use for damage or wear. Do not use a damaged tool or wheel.
• Fitaovana azo antoka: Arovy mafy foana ny fitaovana mba hisorohana ny hetsika mandritra ny fanapahana.
• Fitanana mety: Tazomy mafy tsara ilay fitaovana amin'ny fotoana rehetra.
• Avoid Accidental Start-up: The tool features a lock-off lever to prevent accidental start-up. Always engage this feature when not actively cutting.
• Exhaust Direction: The rear exhaust directs air away from the workpiece. Be aware of the exhaust direction to avoid blowing debris towards yourself or others.
• Fampitandremana 65: Mety hampiharihary anao amin'ny zavatra simika fantatry ny Fanjakan'i Kalifornia fa miteraka homamiadana sy tsy fahatomombanana amin'ny fahaterahana na fahavoazana hafa amin'ny fananahana ity vokatra ity. Sasao ny tanana aorian'ny fikirakirana azy.

Endriky ny vokatra

The Chicago Pneumatic CP874 Air Cut-Off Tool is designed for efficient and precise cutting tasks. Key features include:

• Kodiaran-danja: 2-7/8 Inch (73 mm)
• Adjustable Speed Regulator: Allows matching the speed to the specific job requirements.
• Lock-off Lever: Prevents accidental start-up for enhanced safety.
• Setroka aoriana: Directs air away from the workpiece and operator.
• Air Inlet NPTF: 1/4-Inch connection for air supply.
• Design Compact: Measures 7-1/4 inches long and weighs 1-3/4 pounds for easy handling.

Image: Diagram highlighting the CP874's features: 2-7/8" wheel diameter, lock-off lever, adjustable speed regulator, and rear exhaust.

Hametraka

1. Famoahana: Carefully remove the tool from its packaging. Inspect for any shipping damage.
2. Fifandraisana famatsiana rivotra: Connect a 1/4-inch NPTF air hose to the tool's air inlet. Ensure all connections are secure and leak-free.
3. Air Pressure Regulation: Connect the air hose to an air compressor with a pressure regulator. Set the air pressure according to the tool's specifications (refer to the Specifications section).
4. Cutting Wheel Installation:
   • Ataovy azo antoka fa tapaka ny fitaovana amin'ny famatsiana rivotra.
   • Depress the spindle lock button (if present) or use the provided wrenches to loosen the arbor nut.
   • Place the appropriate cutting wheel onto the arbor, ensuring it is seated correctly.
   • Securely tighten the arbor nut. Do not overtighten.
   • Verify the cutting wheel guard is properly positioned and secured.
5. fanosorana: Add a few drops of pneumatic tool oil into the air inlet before initial use.

Torolàlana miasa

1. Fanamarinana fiarovana: Before each use, perform a safety check as outlined in the Safety Information section.
2. Ampifandraiso ny famatsiana rivotra: Connect the tool to the regulated air supply.
3. Ahitsio hafainganam-pandeha: Use the adjustable speed regulator to set the desired RPM for the material being cut.
4. Fametrahana: Hold the tool firmly with both hands, if possible, ensuring a stable grip. Position the cutting wheel against the workpiece.
5. Manomboka ny fitaovana: Depress the lock-off lever, then squeeze the trigger to start the tool. Allow the wheel to reach full speed before making contact with the workpiece.
6. Manapaka: Apply light, consistent pressure to guide the cutting wheel through the material. Do not force the tool. Let the tool's speed and the wheel's abrasive action do the work.
7. Atsaharo ny fitaovana: Release the trigger to stop the tool. Ensure the wheel has completely stopped rotating before setting the tool down.
8. Aorian'ny fampiasana: Disconnect the tool from the air supply after each use.

Image: An operator wearing safety gloves using a Chicago Pneumatic cut-off tool to cut metal, demonstrating proper handling.

fikarakarana

Ny fikojakojana tsy tapaka dia miantoka ny fampandehanana tsara indrindra ary manitatra ny fiainan'ny fitaovanao.

• fanosorana: Add 2-3 drops of pneumatic tool oil into the air inlet before each use or at the beginning of each work shift.
• Fanadiovana: Keep the tool clean and free from debris. Wipe down the exterior with a clean cloth. Do not use harsh solvents.
• Sivana rivotra: Ensure your air compressor's air filter is regularly cleaned or replaced to provide clean, dry air to the tool.
• Fanoloana kodiarana fanapahana: Replace worn or damaged cutting wheels immediately. Always use wheels rated for the tool's maximum RPM.
• fitahirizana: Store the tool in a dry, secure location when not in use.

Fanamboarana

fepetra arahana

Warranty sy fanohanana

The Chicago Pneumatic CP874 Air Cut-Off Tool comes with a Garantie voafetra 1 taona. Ity fiantohana ity dia manarona ny lesoka amin'ny fitaovana sy ny asa amin'ny fampiasana mahazatra.

For warranty claims, technical support, or service inquiries, please contact Chicago Pneumatic customer service or visit their official website. Please have your model number (CP874) and proof of purchase available.