VGR V-001 Professional Hair Clipper User Manual

1. Fampidirana

Thank you for choosing the VGR V-001 Professional Hair Clipper. This manual provides essential information for the safe and effective use of your new hair cutting machine. Please read it thoroughly before first use and keep it for future reference.

2. Fampahalalana manan-danja momba ny fiarovana

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Aza mampiasa ity vokatra ity amin'ny tanjona hafa ankoatra ny fampiasana azy.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Aza asiana rano na hamandoana.
• Handle with care to avoid cuts or injuries.

3. Vokatra mihoatraview

The VGR V-001 Professional Hair Clipper is designed for precise and efficient hair cutting. It features a powerful BLDC motor, DLC-coated blades, and an LED display for monitoring battery and speed.

3.1. Ny votoatin'ny fonosana

• 1 * Hair Clipper
• 1 * Fametrahana fototra
• 10 * Cutting Guide Combs (1.5-3-4.5-6-9-12-15-18-21-24mm)
• 1 * USB Charging Cable
• 1 * Borosy fanadiovana
• 1 * European Standard Plug
• 1 * Cap fiarovana
• 1 * Instruction Manual (this document)

3.2. Toetran'ny vokatra

• 21-Speed Adjustable Settings: Ranging from 7000 to 9000 RPM for precise control.
• DLC-Coated Blades: Diamond-Like Carbon (DLC) coated blades for exceptional sharpness, durability, and reduced friction.
• Fahazavana LED: Built-in LED light for enhanced visibility during use.
• Motor tsy misy borosy (Brushless Motor): High-performance BLDC motor for smooth, efficient, and consistent power.
• LED fampisehoana: Shows real-time battery life and speed settings.
• Fiainana maharitra bateria: Powered by a robust 4600mAh Li-ion battery.
• Taper Lever: 5 adjustable settings for cutting length (1.0/1.5/2.0/2.5/3.0 mm).

4. Fametrahana

4.1. Alohan'ny hampiasana voalohany

Remove all protective films from the device and its accessories.

4.2. Torolàlana momba ny famandrihana

Connect the provided USB cable to a certified 5V power adapter. Place the hair clipper onto the charging base or plug the USB-Type C cable directly into the clipper's charging port.

• Famandrihana haingana: Use a 5V=2A adapter for approximately 3 hours.
• Famandrihana miadana: Use a 5V=1A adapter for approximately 6 hours.
• The LED display will show the usable time (e.g., 260/300 minutes) when fully charged, accompanied by three beeping sounds.

4.3. Blade Head Installation

Follow these steps to install or re-install the blade head:

1. Install the moving blade onto the blade holder, ensuring it is steady and not loose.
2. Insert the assembled blade holder into the main unit of the clipper.
3. Align the fixed blade at the bottom screw hole and press down smoothly.
4. Insert the screw and tighten it clockwise to secure the blade head.

5. Torolàlana miasa

5.1. Power On/off

To turn on the device, press and hold the power button for 3 seconds. To turn off, press and hold the power button again for 3 seconds.

5.2. Adjusting Speed (RPM)

Short press the power button to cycle through the 21 available speed settings (RPM modes). The current RPM will be displayed on the LED screen.

5.3. Taper Lever Adjustment

The taper lever allows for fine adjustment of cutting length. It has 5 settings: 1.0mm, 1.5mm, 2.0mm, 2.5mm, and 3.0mm. Adjust the lever to your desired cutting length.

5.4. LED Spot Light

To turn on the built-in LED light, click the dedicated LED light button. You will hear a beeping sound. Click the button again to turn off the LED light, accompanied by another beeping sound.

5.5. Using Guide Combs

Select the appropriate guide comb for your desired hair length. The V-001 comes with 10 cutting guide combs ranging from 1.5mm to 24mm. Snap the chosen comb securely onto the clipper blades before use.

6. Fikojakojana

6.1. Fanadiovana

After each use, turn off the device. Use the provided cleaning brush to remove any hair clippings from the blades and the clipper body. The blades can be washed under water for thorough cleaning (Washing knives under water function). Ensure the clipper is completely dry before storing.

6.2. fitahirizana

Store the hair clipper in a dry place, away from direct sunlight and out of reach of children.

7. Famahana olana

• Tsy mandeha ny "clipper": Ataovy azo antoka fa feno ny fitaovana. Ampifandraiso amin'ny charger izany ary omeo fotoana ampy hamerenana azy.
• Fahombiazana ratsy amin'ny fanapahana: Check if the blades are clean and free of hair. If the blades feel dull, they may need to be cleaned or replaced. Ensure the taper lever is set correctly and guide combs are properly attached.
• Feo na vibration tsy mahazatra: Turn off the clipper immediately. Check for any obstructions in the blade area or loose components. If the issue persists, contact customer support.

8. Famaritana

9. Warranty & Fanohanana

All VGR products come with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For detailed information and further assistance, you may refer to the comprehensive user manual in PDF format: Download User Manual (PDF).

10. Torohevitra ho an'ny mpampiasa

• Fanosotra tsy tapaka: Although the blades are DLC-coated for reduced friction, applying a small drop of clipper oil to the blades before and after each use can further enhance performance and prolong blade life.
• Fikarakarana bateria: To maximize battery longevity, avoid completely draining the battery frequently. Charge it when the battery indicator shows low.
• Fantina tohotra: Experiment with different guide comb sizes to find the perfect length for various parts of your hair or beard.