HYCHIKA 1300W Circular Saw User Manual

1. Fampahalalana manan-danja momba ny fiarovana

Always observe basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating this circular saw.

Fampitandremana momba ny fiarovana amin'ny fitaovana herinaratra ankapobeny:

• Fiarovana ny faritra fiasana: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Fiarovana herinaratra: Tsy maintsy mifanandrify amin'ny fivoahana ny plugs amin'ny fitaovana herinaratra. Aza ovaina na oviana na oviana ny plug. Aza mampiasa plug adaptatera miaraka amin'ny fitaovana elektrika misy tany (tany). Ny plugs tsy voaova sy ny fivoahana mifanandrify dia hampihena ny mety hisian'ny fahatafintohinana herinaratra.
• Fiarovana manokana: Always wear eye protection (safety glasses or goggles), hearing protection, and appropriate work gloves. Dress properly. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
• Fitaovana fampiasana sy fikarakarana: Do not force the power tool. Use the correct power tool for your application. It will do the job better and safer at the rate for which it was designed. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
• Kickback sy fampitandremana mifandraika: Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. Proper technique and common sense can avoid kickback.

2. Vokatra mihoatraview

The HYCHIKA 1300W Circular Saw is a powerful and versatile tool designed for precise cutting of various materials, including wood, bamboo plywood, solid wood, plywood, fiberboard, and PVC pipe. It features adjustable cutting depth and angle, a safety switch, and a dust outlet for a cleaner work environment.

singa fototra:

• Motor: 1300W, 4500RPM for efficient and long-lasting performance.
• Safidy fiarovana: Misoroka ny fanombohana tsy nahy.
• Plate ambany: Provides stability during cutting.
• Dust Outlet: Connects to a vacuum cleaner for dust extraction.
• Blade mpiambina (Blade Guard): Protects the user from the rotating blade.
• Adjustable Base Plate: Allows for depth and bevel angle adjustments.
• Tantana: Ergonomic natao ho an'ny fikojakojana aina.

3. Lisitry ny fonosana

Ireto entana manaraka ireto dia tafiditra ao anatin'ny fonosan'ny vokatrao:

• 1 x HYCHIKA 1300W Circular Saw
• 1 x 24T Saw Blade (185mm)
• 1 x Allen Wrench (Hexagonal Spanner)
• 1 x Guide Ruler (Parallel Guide)
• 1 x User Manual

4. Famaritana

5. Fametrahana

5.1 Blade Installation/Replacement:

Always ensure the saw is unplugged from the power source before performing any adjustments or maintenance.

1. Press the Spindle Lock: Tadiavo ary tsindrio ny bokotra hidin'ny spindle mba tsy hihodin'ny lelany.



2. Loosen the Arbor Nut: Use the provided Allen wrench (hexagonal spanner) to loosen the arbor nut that secures the blade.



3. Remove Outer Flange and Old Blade: Once the nut is loose, remove the outer flange and carefully take out the old saw blade.



4. Mametraka Blade Vaovao: Place the new 185mm 24T saw blade onto the arbor, ensuring the teeth are oriented correctly for cutting (usually indicated by an arrow on the blade and saw).



5. Henjana ny Arbor Nut: Reinstall the outer flange and arbor nut. While still pressing the spindle lock, tighten the arbor nut securely with the Allen wrench.

5.2 Adjusting Cutting Depth:

The cutting depth can be adjusted to suit the thickness of your workpiece. For a 90° cut, the maximum depth is 65mm.

1. Loosen the depth adjustment lever (usually located at the front of the saw).
2. Raise or lower the saw base plate to achieve the desired cutting depth.
3. Align the depth indicator with the desired measurement on the scale.
4. Securely tighten the depth adjustment lever.

5.3 Adjusting Cutting Angle (Bevel):

The saw allows for bevel cuts from 0° to 45°. At a 45° inclination, the maximum cutting depth is 45mm.

1. Loosen the bevel adjustment lever (usually located at the rear of the saw).
2. Tilt the saw base plate to the desired angle.
3. Align the angle indicator with the desired measurement on the scale.
4. Securely tighten the bevel adjustment lever.

5.4 Using the Parallel Guide Ruler:

The included guide ruler helps ensure straight and accurate cuts.

1. Slide the guide ruler into the slot on the front of the saw's base plate.
2. Adjust the ruler to the desired cutting width.
3. Tighten the locking screw to secure the ruler in place.
4. Ensure the ruler runs along the edge of your workpiece during the cut for consistent results.

6. Torolàlana miasa

6.1 Preparing for a Cut:

1. Ensure the saw is unplugged when making adjustments.
2. Select the appropriate blade for the material you are cutting.
3. Adjust the cutting depth and angle as required (refer to Section 5).
4. Secure your workpiece firmly to a stable surface using clamps. Never hold the workpiece by hand.
5. Mark your cutting line clearly.
6. Connect the vacuum tube to the dust outlet and a vacuum cleaner if dust extraction is desired.

6.2 Making a Cut:

1. Plug the saw into a suitable power outlet.
2. Tazony mafy amin’ny tanana roa ny tsofa.
3. Position the front edge of the saw's base plate on the workpiece, ensuring the blade is clear of the material.
4. Engage the safety switch and then press the trigger to start the saw. Allow the blade to reach full speed before beginning the cut.
5. Slowly and steadily guide the saw along your marked cutting line. Do not force the saw; let the blade do the work.
6. Maintain a firm grip and keep your body balanced.
7. Rehefa vita ny fanapahana dia avoahy ny trigger ary avelao hijanona tanteraka ny lelany alohan'ny hanandratana ny tsofa amin'ny workpiece.

7. Fikojakojana

Regular maintenance ensures the longevity and safe operation of your circular saw. Always unplug the tool before any maintenance.

• Fanadiovana: After each use, clean the saw thoroughly. Remove sawdust and debris from the motor vents, blade guard, and base plate. Use a soft brush or compressed air.
• Blade Inspection: Regularly inspect the saw blade for sharpness, damage, or missing teeth. A dull or damaged blade can cause kickback and poor cutting performance. Replace blades as needed.
• Fijerena tady: Check the power cord for any cuts, fraying, or damage. Do not use the saw if the cord is damaged.
• fanosorana: The saw's internal components are factory-lubricated and generally do not require additional lubrication. Refer to a qualified service technician for internal maintenance.
• fitahirizana: Store the saw in a dry, secure place out of reach of children.

8. Famahana olana

If you encounter issues with your HYCHIKA Circular Saw, try the following steps:

• Saw does not start:
  • Check if the saw is properly plugged into a working power outlet.
  • Ensure the safety switch is engaged before pressing the trigger.
  • Jereo ny tadin-jiro sao misy fahasimbana.
• Blade gets stuck or cuts slowly:
  • The blade might be dull or damaged. Replace it if necessary.
  • You might be forcing the saw. Allow the blade to cut at its own pace.
  • Ensure the cutting depth and angle are correctly set for the material. For hard materials, adjust the position before cutting to prevent the blade from getting stuck due to overheating.
  • The workpiece might not be properly secured, causing binding.
• Vibration na tabataba be loatra:
  • Check if the blade is securely installed and not warped.
  • Ensure all fasteners on the saw are tight.
  • Raha mbola mitohy ny olana dia atsaharo ny fampiasana ary mifandraisa amin'ny fanohanan'ny mpanjifa.
• Motor issues (e.g., 'motor bruscle' as reported by some users):
  • This could indicate an internal motor problem. Ensure the saw is not overloaded or overheating.
  • Check for any obstructions in the motor's ventilation slots.
  • If the motor is making unusual noises or performing poorly, it is recommended to seek professional service.

9. Torohevitra ho an'ny mpampiasa

• Blade mifanentana: Always ensure you use a 185mm diameter blade with the correct arbor size for this saw. Check the blade specifications carefully when purchasing replacements.
• Preventing Blade Sticking: When cutting hard materials, it is crucial to adjust the saw's position and depth settings appropriately before starting the cut. This helps prevent the saw blade from getting stuck in the material and potentially damaging the machine due to overheating.
• Fitantanana vovoka: Utilize the dust outlet by connecting it to a vacuum cleaner. This significantly reduces airborne sawdust, maintaining a cleaner and safer work environment.
• Practice Cuts: If you are new to using a circular saw or cutting a new material, make practice cuts on scrap pieces first to get a feel for the tool and settings.

10. Warranty sy fanohanana

For any questions, technical assistance, or warranty claims, please contact the HYCHIKA customer support team or your retailer. Please have your product model number (M1Y-DU29-185) and purchase information ready when contacting support.