NAIERDI Invisible Magnetic Door Stop User Manual

1. Mombamomba ny vokatra

This is a general-purpose door stopper, suitable for indoor use such as home, office, hotel, and other places. It adopts a sturdy structure, used to fix the door position, prevent the door from colliding with the wall, furniture or other objects, protect the door, wall and door handle from damage. The product is easy to install, durable, and compatible with most indoor doors, bringing convenience and protection to daily use.

2. Famaritana ara-teknika

3. Fampahafantarana momba ny fanarahan-dalàna

Ity vokatra ity dia mifanaraka amin'ny Torolàlana momba ny fiarovana ny vokatra ankapobeny 2001/95/EC and relevant European safety standards for mechanical security products. It meets the basic safety requirements for consumer products placed on the European market.

4. Safety & Warnings

• Keep the door stopper and small accessories (screws, expansion pipes) away from infants and young children to avoid choking, pinching or scratching hazards.
• Install the door stopper on a firm, flat and clean surface. Do not install on unstable, fragile or slippery walls/floors to prevent it from falling off.
• For household and office use only. Do not use for climbing, lifting heavy objects or other non-intended purposes.
• Do not disassemble, repair or modify the door stopper by yourself, as this will void the warranty and may cause safety risks or product failure.
• Avoid exposing the door stopper to water, moisture, corrosive chemicals or direct sunlight for a long time, which may cause rust, deformation or functional failure.
• During installation, avoid drilling into wires, pipes or other hidden objects inside the wall/floor to prevent accidents.
• Do not use excessive force to hit or pull the door stopper, so as not to damage the product or the door/wall.

5. Fametrahana & Fametrahana

Follow these steps for proper installation of your NAIERDI Invisible Magnetic Door Stop:

1. Clean and dry the installation surface (wall/floor) to ensure it is flat and dust-free.
2. Mark the installation position according to the size of the door stopper and the position of the door when it is fully opened.
3. Install expansion pipes and screws if using wall/floor drilling installation (skip this step for adhesive installation).
4. Fix the door stopper base onto the installation surface and tighten the screws firmly.
5. For magnetic door stoppers, align the magnetic plate with the door stopper and fix it on the door properly.

6. Fampandehanana

The NAIERDI Invisible Magnetic Door Stop is designed for simple and effective operation. When the door is opened and approaches the floor-mounted stopper, the strong magnet in the stopper will engage with the magnetic plate installed on the door, holding the door securely in place. To release the door, simply pull it away from the stopper. The silicone buffer head and inclined card slot design ensure a quiet and smooth operation, preventing sudden slams and reducing noise.

7. Fikojakojana

To ensure the longevity and optimal performance of your door stop:

• Regularly clean the door stop components with a soft, damp lamba hanalana vovoka sy potipoti-javatra.
• Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish and material.
• Inspect the screws periodically to ensure they are tight. Re-tighten if necessary.
• Ensure the magnetic surfaces are free from obstructions to maintain strong magnetic hold.
• If the silicone buffer head shows signs of wear, consider replacing the unit to maintain silent operation and door protection.

8. Famahana olana

• Door not holding securely:
  • Check if the magnetic plate on the door is perfectly aligned with the floor stopper. Adjust if needed.
  • Ensure there is no debris or obstruction between the magnetic surfaces.
  • Verify that the door-to-floor distance is within the recommended 5-21mm range.
• Door stop feels loose:
  • Check all screws on both the floor and door components and tighten them if they are loose.
  • If using adhesive installation, ensure the surface was properly cleaned and dried before application. Re-apply if necessary.
• Increased noise during operation:
  • Inspect the silicone buffer head for any damage or wear.
  • Ensure the door and floor components are clean and free from grit.

9. Torohevitra ho an'ny mpampiasa

• For optimal performance, ensure the installation surface is completely flat and level.
• When marking the installation spot, open the door to your desired maximum position and ensure the magnetic components align perfectly.
• If installing on carpet, ensure the carpet is firmly pressed down or cut to allow the door stop to sit flush.
• The invisible design is particularly beneficial in high-traffic areas where traditional door stops might be a tripping hazard.

10. Warranty & Fanohanana

NAIERDI offers a 7-day return policy for any quality problems. For further support or inquiries, please contact the manufacturer directly.

Manufacturer & EU Representative Information:

Azo alaina ihany koa ny boky torolalana amin'ny antsipiriany amin'ny endrika PDF: User manual (PDF).