1. Vokatra mihoatraview
The Kemei KM-3383 is a powerful, rechargeable electric shaver designed for men. It features a reciprocating titanium foil metal tool head, offering a close dry shave for face, hair, and short stubble. This shaver is designed for cord/cordless operation and comes with a premium charging stand.
2. Famaritana
| toetra | sarobidy |
|---|---|
| Anarana marika | Kemei |
| Laharana modely | KM-3383 |
| Karazana entana | Shaver elektrika |
| lahy sy ny vavy | Lahy |
| Karazana hery | Rechargeable |
| Loharanon-kery | Rechargeable |
| fahefana | 5W |
| BOKYtage | Global Universal (100-240V) |
| Time Charging | 2 ora |
| Fotoana fampiasana | 90 minitra |
| asa | Ny fiharatana maina |
| Karazana hareza | Mesh (Foil) |
| endri-javatra | Twin Blade |
| Fomba fanasana | Aza manasa |
| With trimming device | tsy misy |
| KEVITRA | ABS + Stainless vy |
| Haben'ny vokatra | 11.7x6CM |
| Misy bateria ve | ENY |
| Certification | CE |
3. Fametrahana sy fiampangana
3.1 fiampangana voalohany
Before first use, fully charge the shaver. Connect the USB cable to the charging base and plug it into a suitable USB power source (e.g., wall adapter, computer USB port). Place the shaver into the charging base. The charging indicator light will illuminate. A full charge takes approximately 2 hours.
3.2 Cordless Operation
The shaver is designed for cordless use after charging, providing up to 90 minutes of usage time on a full charge.
4. Torolàlana miasa
4.1 Fanaratra
The Kemei KM-3383 is intended for dry shaving only. Ensure your skin is dry before use. Turn on the shaver using the power button. Gently press the shaver head against your skin and move it in short, circular, or linear motions against the direction of hair growth. The twin blade system is effective for face, hair, and removing stubble.
5. Fikojakojana sy fanadiovana
Important: This shaver is NOT washable. Do not rinse under water or immerse in liquids.
5.1 Fanadiovana ankapobeny
After each use, turn off the shaver. Remove the foil head by pressing the release button (refer to Figure 7). Use the provided cleaning brush to gently brush away any accumulated hair from the foil and the internal cutting blades. Reattach the foil head securely.
5.2 Blade Alignment (from OCR)
Your shears are carefully inspected to ensure that the blades are oiled and aligned before they leave our factory. If the blades are removed for cleaning or replacement, they must be re-aligned. Simply match the top and bottom blade teeth point to point upwards. (The ends of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade. Compare your scissor blades with the sketch). If the blades are not aligned correctly, put a few drops of oil on the blades, turn the shears open for a while, close and unplug them. Loosen the screw slightly and make adjustments until the blades are aligned then tighten the screw.
5.3 Cutter Maintenance (from OCR)
To keep your shears in top condition, the blades should be oiled every few haircuts. To oil it properly, the unit blades should be kept in the downward position. Run the shears with the blades through the top blade.
6. Famahana olana
If the shaver is not performing as expected, consider the following:
- Not turning on: Ataovy azo antoka fa feno tanteraka ny shaver.
- Ratsy ny fiharatana: Clean the foil head and blades thoroughly. Ensure blades are properly aligned.
- tabataba tsy mahazatra: Check for any trapped hairs or debris in the cutting mechanism. Ensure the foil head is correctly attached.
Raha misy olana maharitra, jereo ny fizarana momba ny antoka sy ny fanohanana.
7. Warranty sy fanohanana
7.1 Product Guarantees (from OCR)
- The product is manufactured and inspected through strict quality control.
- If a fault occurs during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair center in accordance with the warranty card. (Batteries and blades are consumables and are not included in the warranty and are subject to payment).
7.2 Warranty Exclusions (from OCR)
Free service will not be provided in the following cases:
- Damage caused by unapproved repairs or alterations.
- Damage caused by incorrect or negligent use or accident.
- Damage caused by natural disasters or voltage anomalies.
- Damage due to neglect of product specifications.
7.3 Fanampim-baovao
For further details or to view the original user manual, you may refer to the PDF document available at: Kemei KM-3383 User Manual (PDF).
8. Torohevitra ho an'ny mpampiasa
- For best results, ensure the shaver is fully charged before each use.
- Always use the shaver on dry skin for optimal performance and to prevent irritation, as it is designed for dry shaving.
- Regularly clean the shaver head and blades with the provided brush to maintain cutting efficiency and hygiene.
- Store the shaver in its charging base or a dry place when not in use.