SmartFusion2 Manuals & User Guides

Microsemi SmartFusion2 FPGA Fabric DDR Controller Configuration User Guide Introduction The SmartFusion2 FPGA has two embedded DDR controllers - one accessible via the MSS (MDDR) and the other intended for direct access from the FPGA Fabric (FDDR). The MDDR and…

Microsemi SmartFusion2 FIFO Controller without Memory Configuration User Guide Introduction The FIFO Controller without Memory generates only the FIFO controller logic. This core is intended to be used along with either a Two-Port Large SRAM or a Micro SRAM. The…

SmartFusion2 MSS CAN Configuration Introduction The SmartFusion2 Microcontroller Subsystem (MSS) provides one CAN hard peripheral (APB_1 sub bus). On the MSS Canvas, you must enable (default) or disable the CAN instance based on whether it is being used in your…

SmartFusion2 MSS Configurator User Guide Introduction The MSS Component Configurator presents you with a graphical block diagram of the SmartFusion2 Micro controller Subsystem. You can enable/disable and configure each MSS sub-block as per your application requirements (Figure 1). Peripherals Enabling/Disabling…