Mamokatra jiro LED avo lenta, vokatra avy amin'ny atmosfera, ary fitaovana fampisehoana ho an'ny DJ, toerana fialamboly, ary fampiharana ara-maritrano ny beamZ.
beamZ is a leading brand in the entertainment lighting and effects industry, offering a comprehensive range of products designed for mobile DJs, stage productions, and permanent installations. Known for innovation and reliability, the beamZ catalog includes advanced moving heads, LED bars, wash lights, lasers, and stroboscopes, as well as atmospheric units like smoke, haze, bubble, and snow machines.
Part of the Tronios group, beamZ emphasizes accessible professional features, such as DMX control, wireless connectivity, and robust outdoor-rated (IP65) designs found in their StarColor and Nereid series. Whether for a small party or a large-scale stage event, beamZ provides effective lighting solutions to enhance any visual performance.
Torolàlana farany avy amin'ny manuals+ natokana ho an'ity marika ity.
Fanontaniana mahazatra momba ny boky torolalana, fisoratana anarana ary fanohanana an'ity marika ity.
To prevent clogging, it is recommended to clean your smoke machine periodically. Run a cleaning solution (specifically designed for fog machines) through the system in a well-ventilated area. Do not use plain water or vinegar unless the manual explicitly states otherwise, as this can damage the heater block.
Most beamZ fixtures feature a digital display on the unit. Press the 'Menu' button until you reach the DMX address setting (usually displayed as dXXX or AXXX), then use the Up/Down buttons to select your desired starting address. Press 'Enter' to save.
An IP65 rating indicates that the fixture is dust-tight and protected against water jets from any angle. beamZ IP65 models, such as the LCB246IP and StarColor series, are suitable for temporary outdoor use and are resistant to rain and moisture.
Check that your DMX cables are properly connected and terminated. Ensure the fixture is set to the correct DMX channel mode matching your controller profile. Also, verify that the DMX address does not overlap with other fixtures on the same line.