CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Torolàlana manan-danja momba ny fiarovana

Azafady vakio ary fantaro tsara ny toromarika fiarovana rehetra alohan'ny hampiasana ity fitaovana ity. Ny tsy fanarahana ireto toromarika ireto dia mety hiteraka fahatairana herinaratra, afo, na ratra mafy.

• Always connect the unit to a grounded outlet.
• Aza atsoboka ao anaty rano na ranon-javatra hafa ny singa fototra.
• Do not operate the cleaner without liquid in the tank.
• Arovy amin'ny ankizy.
• Do not touch the tank or cleaning solution during operation, especially when heated.
• Unplug the unit from the power source before cleaning or servicing.
• Use appropriate cleaning solutions for the items being cleaned. Avoid flammable or corrosive liquids.
• Ensure the lid is closed during operation to prevent splashing.
• Do not disassemble or modify the unit. Contact qualified service personnel for repairs.

2. Vokatra mihoatraview

The CREWORKS 10L Ultrasonic Cleaner is an industrial-grade cleaning machine designed for thorough and efficient cleaning of various items using 33kHz ultrasonic waves, sweep function, and adjustable temperature control.

Endri-javatra fototra

• 10L fahafahana: Generous tank volume for various cleaning tasks.
• 33kHz Ultrasonic Frequency: Effective for removing tough residues, grime, and grease.
• Asa famafana: Varies cavitation bubble size and intensity to reach complex shapes and blind cavities for uniform cleaning.
• Degas Mode: Removes trapped air bubbles from the cleaning solution to enhance cavitation and cleaning efficiency.
• Hery azo ahitsy: Customizable ultrasonic power settings for delicate instruments or heavy-duty parts.
• Timer azo ahitsy: 0-30 minute timer for precise control over cleaning cycles.
• Fanaraha-maso ny maripana: Heating range of 68-140°F (20-60°C) to optimize cleaning performance.
• 304 Stainless vy fanorenana: Durable and corrosion-resistant tank and housing.
• Integrated Drain Port: For convenient and mess-free fluid drainage.

Fonosana fonosana

Hamarino fa misy ny entana rehetra ary ao anatin'ny toe-javatra tsara rehefa voavaha.

• 1 x CREWORKS 10L Ultrasonic Cleaner Unit
• 1 x Tady herinaratra
• 1 x Mesh Basket
• 1 x Drain Hose
• 1 x Boky Torolàlana

Image: The main CREWORKS 10L Ultrasonic Cleaner unit, showing its stainless steel construction and control panel.

Sary: Vitaview of the CREWORKS 10L Ultrasonic Cleaner, highlighting its timer control, temperature control, ultrasonic power, and heating power.

3. Fametrahana

1. Famoahana: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Retain packaging for future storage or transport.
2. Fametrahana: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
3. Fampifandraisana herinaratra: Ensure the power switch is in the "OFF" position. Connect the power cord to the unit and then to a grounded electrical outlet.
4. Fenoy ny tanky (Fill the tank): Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. Ampidiro harona: If using, place the mesh basket into the tank. Place items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank.

Image: The ultrasonic cleaner with its mesh basket inserted, ready for items to be placed inside.

4. Fampandehanana

Familiarize yourself with the control panel before beginning operation.

Fanaraha-masoview

Sary: A antsipirihany view of the control panel, showing the ultrasonic, degas, power, timer, and heater settings.

• Hery Switch: Mivadika / mamono ilay singa.
• Fanaraha-maso ny ora: Adjusts the cleaning duration from 0 to 30 minutes.
• Fanaraha-maso ny maripana: Sets the desired heating temperature from 68°F to 140°F (20°C to 60°C).
• Ultrasonic Power Control: Adjusts the intensity of the ultrasonic waves.
• Degas Button: Activates the degas function to remove air from the solution.
• Sweep Button: Activates the sweep function for enhanced cleaning uniformity.

Fomba fanadiovana

1. Manomana entana: Ensure items are suitable for ultrasonic cleaning. Remove any loose debris before placing them in the basket.
2. Ampio vahaolana: Fill the tank with the appropriate cleaning solution.
3. Mametraha ny mari-pana (tsy voatery): If heating is desired, set the temperature control to the desired value. Allow time for the solution to reach the set temperature.
4. Activate Degas (Recommended): For optimal cleaning, press the Degas button for 1-2 minutes to remove dissolved gases from the fresh cleaning solution. This improves cavitation efficiency.
5. Set Timer and Power: Set the timer to the desired cleaning duration (0-30 minutes) and adjust the ultrasonic power level according to the items being cleaned. Lower power for delicate items, higher for robust items.
6. Manomboka manadio: Close the lid and turn on the unit. The ultrasonic cleaning process will begin.
7. Fanaraha-maso ny fandrosoana: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
8. Finish Cleaning: Once the timer expires or cleaning is complete, turn off the unit. Carefully remove the basket with the cleaned items.
9. Sasao sy maina: Rinse the cleaned items thoroughly with clean water and dry them completely.

Image: Diagram illustrating the full-coverage sweep technology, showing varying cavitation bubbles reaching all surfaces for uniform cleaning.

Image: Visual representation of the degassing mode for enhanced cavitation and the customizable power setting dial.

Image: Comparison photos showing items before and after cleaning with the ultrasonic cleaner, demonstrating its effectiveness on various materials.

5. Fikojakojana

Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner.

• Fandroahana ny tanky (Draining the Tank): After each use, especially with dirty solutions, drain the tank using the integrated drain port. Place a suitable container under the drain valve, open the valve, and allow the liquid to flow out.
• Fanadiovana ny tanky: Rinse the tank thoroughly with clean water after draining. Wipe the interior and exterior of the unit with a soft, damp lamba. Aza mampiasa mpanadio abrasive na atsoboka ao anaty rano ilay fitaovana.
• Lid and Basket: Clean the lid and mesh basket with soap and water, then rinse and dry completely.
• fitahirizana: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Fanaraha-maso tsy tapaka: Jereo tsy tapaka ny tariby herinaratra raha misy fahasimbana. Raha simba dia atsaharo ny fampiasana ary mifandraisa amin'ny serivisy ho an'ny mpanjifa.

Image: Close-up of the integrated drain port, designed for easy and mess-free liquid removal from the tank.

6. Famahana olana

Jereo ity fizarana ity raha mila fanazavana momba ireo olana mahazatra sy ny vahaolana amin'izany. Raha mbola mitohy ny olana dia mifandraisa amin'ny serivisy ho an'ny mpanjifa.

7. Famaritana

Image: Diagram showing the external dimensions of the 10L ultrasonic cleaner and the internal dimensions of the cleaning basket.

8. Warranty sy fanohanana

For warranty information, technical support, or service inquiries, please contact CREWORKS customer service. Refer to your purchase documentation for specific warranty terms.

You can visit the official CREWORKS store for more information and support: CREWORKS Store on Amazon