Generic Replacement Parts for Maytag MTW5840TW0 Washer Agitator Cam Dogs Kit

1. Vokatra mihoatraview

This instruction manual provides detailed guidance for the installation and maintenance of the Generic Replacement Parts Kit for Maytag MTW5840TW0 Washer Agitator Cam Dogs. This kit is designed to restore proper agitator function in compatible washing machines by replacing worn or damaged cam dogs and associated components.

2. Information momba ny fiarovana

• Always disconnect power to the washing machine by unplugging it from the electrical outlet before attempting any repairs or installations to prevent electric shock.
• Wear appropriate personal protective equipment, such as gloves and eye protection, during installation to prevent injury.
• If you are unsure about any step in the installation process, consult a qualified appliance repair technician.
• Arovy ny ampahany kely amin'ny ankizy mba hisorohana ny loza mety hitranga.

3. Ny votoatin'ny fonosana

Ny kitapo dia ahitana ireto singa manaraka ireto:

• Agitator Cam (white plastic)
• Drive Block (white plastic)
• Cam Dogs (4 clear plastic pieces)
• Rubber O-ring (black)
• Washer (black rubber)

The image above displays all components included in the replacement kit.

4. Fametrahana sy fametrahana

Fanamarinana mifanaraka

Before beginning, verify that your washing machine model is MEYtag MTW5840TW0. Appliance parts can appear similar, so confirming the model number is crucial for correct fitment.

Fitaovana ilaina

You may need a screwdriver, pliers, and potentially a socket wrench, depending on your specific washing machine configuration.

Dingana fametrahana

1. Tapaka ny hery: Esory amin'ny faladiany ny milina fanasan-damba mba hisorohana ny fahatairana elektrika.
2. Access Agitator: Open the washing machine lid. The agitator is the central column in the wash tub.
3. Remove Agitator Cap: Locate and remove the agitator cap, usually by prying it off or unscrewing it.
4. Remove Agitator Bolt: Inside the agitator, there is typically a bolt securing it to the transmission shaft. Use the appropriate tool to remove this bolt.
5. Remove Agitator: Carefully pull the agitator straight up and out of the wash tub. It may require some force.
6. Disassemble Agitator Base: Once the agitator is removed, you will see the agitator cam and cam dogs at its base. Disassemble the old components. Note the orientation of the existing parts.
7. Install New Cam Dogs: Place the new cam dogs into their designated slots in the agitator base. Ensure they are oriented correctly to engage with the drive block.
8. Install New Agitator Cam and Drive Block: Assemble the new agitator cam and drive block according to the original configuration. The rubber O-ring and washer should be placed as per the original setup to ensure a proper seal and fit.
9. Reinstall Agitator: Carefully lower the agitator back onto the transmission shaft, aligning it properly.
10. Secure Agitator: Reinstall and tighten the agitator bolt.
11. Replace Agitator Cap: Place the agitator cap back into position.
12. Ampifandraiso indray ny hery: Avereno ampidirina amin'ny faladia herinaratra ny milina fanasan-damba.
13. Fampiasana fitsapana: Run a short wash cycle to ensure the agitator is functioning correctly.

5. Torolàlana miasa

This kit provides replacement parts for the agitator mechanism. No specific operating instructions are required beyond the normal operation of your Maytag MTW5840TW0 washing machine. After installation, ensure the agitator moves freely and effectively during wash cycles.

6. Fikojakojana

Regularly inspect the agitator cam dogs for signs of wear or damage. If the agitator's performance diminishes, or if you hear unusual noises during agitation, inspect these components. Keep the area around the agitator clean and free from debris that could interfere with its movement.

7. Famahana olana

Agitator Not Moving or Moving Weakly

• Check Cam Dogs: Ensure the cam dogs are installed correctly and are not worn or broken. Worn cam dogs are a common cause of agitator malfunction.
• Verify Agitator Bolt: Confirm the agitator bolt is securely tightened. A loose bolt can prevent proper agitator engagement.
• Inspect Drive Block: Ensure the drive block is correctly seated and not damaged.
• Herin'aratra: Confirm the washing machine has power and is not in a paused or error state.

Unusual Noises During Agitation

• Ampahany malalaka: Check for any loose components within the agitator assembly.
• Zavatra vahiny: Inspect the wash tub and agitator for any foreign objects that may be causing obstruction or noise.
• Ireo singa tonta: If noises persist, the agitator cam dogs or other internal agitator components may be excessively worn and require replacement.

8. Famaritana

• Karazana vokatra: Washer Agitator Cam Dogs Replacement Kit
• Modely mifanentana: MEYtag MTW5840TW0
• Mpanamboatra: Fricparts
• Laharan'ny ampahany: FRIC-PL-APP-TP-22052025-004463
• Kit singa: Agitator Cam, Drive Block, 4 Cam Dogs, Rubber O-ring, Washer
• loko: Black/White (referring to the components in the kit)

9. Fampahalalana momba ny fiantohana

No specific warranty information is provided with this product data. Please refer to the seller or manufacturer's website for details regarding warranty coverage, if any.

10. Fanohanana ny mpanjifa

For further assistance or inquiries regarding this replacement kit, please contact the seller directly through the platform where the purchase was made. Provide your order number and the product's part number (FRIC-PL-APP-TP-22052025-004463) for efficient support.