VEVOR 170D

VEVOR Gas Pressure Washer 170D User Manual

Modely: 170D

1. Fampidirana

Thank you for choosing the VEVOR Gas Pressure Washer Model 170D. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your pressure washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

This gas-powered pressure washer is designed for various cleaning tasks, offering a maximum pressure of 3400 PSI (239.04 kgf/cm²) and a flow rate of 10 L/min. It is suitable for cleaning vehicles, fences, patios, driveways, and other outdoor surfaces.

VEVOR Gas Pressure Washer 170D in operation, showing a person cleaning a surface with high-pressure water spray.

Figure 1.1: VEVOR Gas Pressure Washer 170D in use, demonstrating its powerful water spray for effective cleaning.

2. Information momba ny fiarovana

Always observe basic safety precautions when using this product to reduce the risk of injury or damage. Failure to follow these instructions may result in serious injury or property damage.

2.1 Fampitandremana ankapobeny momba ny fiarovana

  • Vakio ny boky torolalana manontolo: Fantaro tsara ny toromarika sy ny fampitandremana rehetra alohan'ny hampiasana azy.
  • Manaova fitaovana fiarovana sahaza: Always wear eye protection (safety glasses or goggles), hearing protection, and protective clothing.
  • Arovy ny ankizy sy ny biby fiompy: Aza avela hampiasa ilay milina fanasana vilia ny ankizy na ny olona tsy voaofana.
  • Operate in a well-ventilated area: The engine produces carbon monoxide, which is a colorless, odorless, and poisonous gas.
  • Fuel handling: Handle gasoline with extreme care. Store fuel in approved containers and never refuel a hot or running engine.
  • High-pressure spray: Never direct the spray at people, animals, electrical devices, or the unit itself. The high pressure can cause severe injury.
  • Stable surface: Ampandehano eo amin'ny toerana mirindra tsara ny fanasan-damba fanerena mba tsy hikorontana.
  • Jereo raha misy fahasimbana: Before each use, inspect the unit, hoses, and nozzles for any damage. Do not operate if damaged.

3. Ny votoatin'ny fonosana

Verify that all items listed below are included in your package. If any parts are missing or damaged, contact VEVOR customer service.

  • Gas Pressure Washer Unit (main body with engine and pump)
  • High-Pressure Hose (26 ft / 8 m)
  • Basy famafazana
  • Wand
  • Quick-Connect Nozzles (5 types: 0°, 15°, 25°, 40°, Soap Nozzle)
  • Kodiarana (2)
  • Handle Assembly
  • 8-10 Wrench (1)
  • Screwdriver Phillips (1)
  • Spark Plug Socket and Socket Bar (1)
VEVOR Gas Pressure Washer 170D with all components and accessories laid out.

Sary 3.1: Tapitraview of the VEVOR Gas Pressure Washer 170D and its included accessories.

4. Fametrahana sy Fivoriambe

Araho ireto dingana ireto mba hananganana sy hanomanana ny milina fanasana misy tsindry ambony (pressure washer) ho an'ny fampiasana voalohany.

4.1 Fivoriambe

  1. Attach the Wheels: Securely attach the two wheels to the main frame using the provided hardware.
  2. Mametraka ny tanana: Slide the handle assembly into the designated slots on the main unit and secure it with the locking pins or bolts.
  3. Ampifandraiso amin'ny Hose High Pressure: Connect one end of the high-pressure hose to the pump outlet on the pressure washer and the other end to the spray gun. Ensure connections are tight.
  4. Ampifandraiso ny Tehina: Connect the spray wand to the spray gun.

4.2 Soliky sy Menaka

The engine is shipped without oil or fuel. You must add both before starting the unit.

  • Ampio menaka motera: Remove the oil fill cap/dipstick. Add the recommended engine oil (refer to engine manual for type and capacity) until it reaches the full mark on the dipstick. Do not overfill.
  • Ampio lasantsy: Fill the fuel tank with fresh, unleaded gasoline (minimum 87 octane). Do not overfill. Leave space for fuel expansion.

4.3 Fifandraisana amin'ny rano

  • Connect a garden hose (minimum 5/8 inch diameter) to the water inlet on the pressure washer.
  • Ensure the garden hose is free of kinks and has a steady water supply.
  • Velomy tanteraka ny famatsian-drano.
  • Squeeze the trigger on the spray gun to purge air from the pump and hose until a steady stream of water emerges. This prevents damage to the pump.
Akaiky view of the VEVOR Gas Pressure Washer 170D engine and pump assembly.

Sary 4.1: antsipirihany view of the 210cc 4-stroke engine and axial cam pump, highlighting key components for setup.

5. Torolàlana miasa

Araho ireto dingana ireto mba hahazoana asa azo antoka sy mahomby amin'ny mpanasa fanerena anao.

5.1 Fanombohana ny motera

  1. Ensure the water supply is fully on and all air is purged from the system.
  2. Avereno amin'ny toeran'ny "ON".
  3. Move the choke lever to the "CHOKE" position (cold engine).
  4. Move the fuel valve to the "ON" position.
  5. Tariho mafy ny tahon'ny "recoil starter" mandra-pirehitra ny motera.
  6. Rehefa mandeha ny motera dia afindrao tsikelikely amin'ny toerana "RUN" ny leveran'ny "choke".

5.2 Using Nozzles

The pressure washer comes with 5 quick-connect nozzles for various applications.

  • 0° Red Nozzle: Concentrated, high-impact jet for tough stains and hard-to-reach areas. Use with extreme caution.
  • 15° Yellow Nozzle: Narrow spray for intensive cleaning of small areas.
  • 25° Green Nozzle: Medium spray for general cleaning of most surfaces.
  • 40° White Nozzle: Wide spray for gentle cleaning of delicate surfaces.
  • Vavony savony mainty: Low-pressure spray for applying detergent.

To change nozzles, pull back the collar on the quick-connect fitting at the end of the wand, insert the desired nozzle, and release the collar. Ensure the nozzle is securely seated before operating.

Illustration of the five quick-connect nozzles and their spray patterns.

Figure 5.1: The five quick-connect nozzles and their corresponding spray angles and applications.

5.3 Detergent Application

  • Fill the detergent tank with pressure washer safe detergent.
  • Attach the black soap nozzle to the spray wand.
  • Start the engine and squeeze the trigger. The detergent will be drawn from the tank and mixed with the water at low pressure.
  • Rehefa avy manosotra savony fanadiovana dia soloy amin'ny fantsona misy tsindry ambony (oh: 25° na 15°) mba hanasana tsara ny velarana.

5.4 Fanakatonana

  1. Vonoy ny switch motera.
  2. Vonoy ny valva solika.
  3. Vonoy ny famatsian-drano.
  4. Tsindrio ny bokotra famafazana mba hamoahana izay tsindry sisa tavela ao amin'ny rafitra.
  5. Esory ny fantson-dranon'ny zaridaina sy ny fantsom-pamokarana avo lenta.
Diagram showing the extended use area of the pressure washer with its 26 ft hose, cleaning a car and other surfaces.

Figure 5.2: The extended reach provided by the 26 ft (8 m) high-pressure hose, allowing for versatile cleaning applications.

6. Fikojakojana

Regular maintenance ensures optimal performance and extends the life of your pressure washer. Always disconnect the spark plug wire before performing any maintenance.

6.1 Fikojakojana motera

  • Jereo ny menaka motera: Jereo ny haavon'ny menaka alohan'ny hampiasana azy tsirairay. Soloy ny menaka rehefa afaka 5 ora voalohany, avy eo isaky ny 50 ora na isan-taona.
  • Sivana rivotra madio: Inspect the air filter every 25 hours or more often in dusty conditions. Clean or replace as needed.
  • Jereo ny "bouche": Zahao isan-taona na isaky ny 100 ora ny bougie. Diovy na soloo raha ilaina.

6.2 Fikojakojana ny paompy

  • Sivana fidirana rano madio: Regularly check and clean the screen filter on the water inlet to prevent debris from entering the pump.
  • ririnina: If storing the pressure washer in freezing temperatures, use a pump protector or RV antifreeze to prevent damage to the pump.

6.3 Hose and Nozzle Maintenance

  • Inspect Hoses: Regularly check the high-pressure hose and garden hose for cuts, leaks, or damage. Replace if necessary.
  • Madio nozzles: If a nozzle becomes clogged, use the included nozzle cleaning tool to clear any obstructions.

7. Famahana olana

Ity fizarana ity dia manome vahaolana amin'ireo olana mahazatra mety hatrehinao.

OLANAAntony mety hitrangavahaolana
Tsy manomboka ny moteraTsy misy solika
OFF ny motera
Kenda tsy voapetraka tsara
Olana amin'ny "bouche"
Manampia solika vaovao
Avadiho ho ON ny switch-n'ny motera
Amboary ny lefa mikiky
Check/clean/replace spark plug
Fanerena rano ambanyTsy ampy ny rano
Nozzle tsentsina
Rivotra ao anaty paompy
Pompeo simba
Ensure full water supply
Nozzle madio
Purge air from pump
Contact service centre
Mandeha mafy ny moteraSolika efa maty
Sivana rivotra tsentsina
Olana amin'ny "bouche"
Tatatra ary fenoy solika vaovao
Manadio / manolo ny sivana rivotra
Check/clean/replace spark plug
Mivoaka ny rano avy amin'ny paompyFitaovana malalaka
Tombokase simba
Hamafiso ny fifandraisana rehetra
Contact service centre

8. Famaritana

Technical specifications for the VEVOR Gas Pressure Washer Model 170D.

  • marika: VEVOR
  • Modely: 170D
  • Loharano herinaratra: lasantsy-Powered
  • maotera: 210cc 4-stroke, 7 HP
  • Fanerena ambony indrindra: 3400 PSI (239.04 kgf/cm²)
  • Taham-pidirana ambony indrindra: 10 L/min
  • Haben'ny fantson-drivotra avo: 26 ft (8 m)
  • Nozzles: 5 Quick-Connect (0°, 15°, 25°, 40°, Soap Nozzle)
  • Ny haben'ny vokatra (L x W x H): 52.5 x 72 x 87 sm (20.67 x 28.35 x 34.25 santimetatra)
  • Lanja entana: 58.03 lbs (26.32 kg)
  • UPC: 197988808220
Diagram showing the dimensions and key specifications of the VEVOR Gas Pressure Washer 170D.

Figure 8.1: Dimensional drawing and key specifications of the VEVOR Gas Pressure Washer 170D.

9. Warranty sy fanohanana

For warranty information, technical support, or to order replacement parts, please contact VEVOR customer service. Keep your purchase receipt and product model number handy for faster service.

You can typically find support contact information on the VEVOR official webtranokala na amin'ny alàlan'ny mpivarotra anao.

© 2023 VEVOR. Zo rehetra voatokana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.