BRPOM BM600 Car Jump Starter User Manual

1. Fampidirana

Thank you for choosing the BRPOM BM600 Car Jump Starter. This powerful and portable device is designed to jump start vehicles with up to 12.0L diesel or all gas engines, providing 8000 amps of peak current. It also functions as a portable power bank and an LED flashlight. Please read this manual thoroughly before use to ensure safe and effective operation.

2. Information momba ny fiarovana

WARNING: Read and understand all safety information before using this product. Failure to follow these safety instructions may result in electrical shock, explosion, fire, which may result in serious injury, death, or property damage.

• Aza ampiasaina ny jump starter raha simba.
• Aza mitsambikina manomboka bateria mangatsiaka.
• Hamarino tsara ny fifandraisana polarity (mena clamp ho tsara, mainty clamp to negative). Reverse polarity can cause damage.
• Aza avela ny mena sy mainty clamps hifampikasoka.
• Arovy amin'ny ankizy.
• Ampiasao amin'ny faritra misy rivotra tsara.
• Aza avela amin'ny rano, orana, na lanezy ny vokatra.
• Aza esorina ilay fitaovana. Ampandehano any amin'ny mpiasa mahafeno fepetra ny fanamboarana azy.
• Do not store the jump starter in temperatures exceeding 60°C (140°F).

3. Ny votoatin'ny fonosana

• BRPOM BM600 Car Jump Starter Unit
• Smart Jumper Clamps
• USB-C Charging Cable
• User Manual
• Trano fitahirizana

4. Endriky ny vokatra sy ny singa

Image: The BRPOM BM600 Car Jump Starter connected to smart clamps, ready for use. The device features an integrated LED light, a digital display, and control buttons. The smart clamps are shown with a voltage reading of 16.5V. The image highlights the device's capability of 8000A peak current for all gas and 12.0L diesel engines.

Lafin-javatra fototra:

• 8000A Tampony Courant: Capable of jump starting large engines.
• Bateria avo lenta: 26800mAh internal battery.
• Multi-asa: Jump starter, power bank, LED flashlight.
• Smart Clamps: Provides protection against reverse polarity, over-current, short-circuit, over-charge, and over-temperature.
• Fampisehoana nomerika: Shows battery level and operational status.

Component Overview:

• Seranan-tsambo fanombohana: Connects to the smart jumper clamps.
• Seranan-tsambo fivoahana USB: Ho an'ny famandrihana fitaovana finday.
• Port USB-C fampidirana: For recharging the jump starter.
• Jiro LED: Manome hazavana amin'ny fomba maro.
• Power Button/Display: Activates the unit and shows status.
• Control Buttons (M, OK, +, -): Ho an'ny navigateur menus sy ny fanitsiana ny toe-javatra.

5. Famandrihana ny Jump Starter

Before first use, fully charge the BRPOM BM600. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not in use.

1. Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car charger.
3. The digital display will show the charging status. The unit is fully charged when the display indicates 100%.

6. Toromarika momba ny fampiasana: Fampiakarana haingana ny fiara

Hamarino tsara fa farafahakeliny 50% ny herin'ny "jump starter" alohan'ny hanandramana manomboka fiara.

1. Connect Smart Clamps: Insert the blue plug of the smart jumper clamps into the jump start port on the BRPOM BM600. Ensure a firm connection.
2. Ampifandraiso amin'ny bateria fiara: Apetaho ny mena (+) clamp to the positive terminal of the vehicle's battery and the black (-) clamp mankany amin'ny terminal négatif.
3. famantarana famantarana: Observe the indicator light on the smart clamps. A solid green light indicates a correct connection and that the unit is ready to jump start. If a red light or no light appears, check connections and battery voltage.
4. Manomboka fiara: Once the green light is solid, start your vehicle's engine. If the engine does not start immediately, wait 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.
5. Esory ny Clamps: Raha vao mandeha ny fiara dia esory avy hatrany ny "smart cl"amps from the car battery, then disconnect the clamps avy amin'ny jump starter.

7. Mampiasa toy ny Power Bank

The BRPOM BM600 can charge various USB-powered devices such as smartphones, tablets, and cameras.

1. Ampifandraiso amin'ny iray amin'ireo seranana famoahana USB eo amin'ny fanombohana jump ny fitaovanao.
2. The jump starter will automatically begin charging your device. The digital display will show the remaining battery level.
3. Tapaho ny fitaovanao rehefa vita ny fiampangana.

8. Mampiasa ny jiro LED

The integrated LED flashlight has multiple modes for different situations.

1. Press and hold the flashlight button (often marked with a sun icon or similar) to turn on the steady light mode.
2. Press the button again to cycle through modes: steady light > strobe light > SOS signal > off.

9. Fikojakojana sy fitehirizana

• Clean the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store the jump starter in its protective case in a cool, dry place away from direct sunlight.
• Recharge the unit every 3-6 months to prolong battery life, even if not in use.
• Keep the jump start port and USB ports free from dust and debris.

10. Famahana olana

11. Famaritana

• Modely: BM600
• TAMPON'ISAN'NY Ampfandravana: 8000 Amps
• Fahaizana bateria: 26800mAh (Lithium Polymer)
• BOKYtage: 12 Volts
• Mifanaraka amin'ny maotera: Up to 12.0L Diesel / All Gas Engines
• Haben'ny vokatra: 10.16 x 25.4 x 7.62 cm
• Lanja entana: 839 g
• Temperature miasa: -20 ℃ hatramin'ny 60 ℃

12. Warranty sy fanohanana

BRPOM products are designed and manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or customer service inquiries, please refer to the warranty card included in your package or visit the official BRPOM website. Please have your model number (BM600) and purchase information ready when contacting support.