Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Vokatra mihoatraview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Lafin-javatra fototra:

• High Airflow Design: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Jiro D-RGB mitambatra: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Mpankafy efa napetraka: Includes three high-performance M25-140 D-RGB fans.
• Fanohanana fampangatsiahana betsaka: Supports up to 420mm radiators in the front and 360mm in the top.
• Malalaka anatiny: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Fitehirizana mora azo: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Fampidirana/Famoahana eo anoloana maoderina: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Fametrahana sy fametrahana

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Fanomanana ny Chassis

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Fametrahana Motherboard

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Fametrahana Unite famatsiana herinaratra (PSU).

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Fametrahana fitaovana fitahirizana

The case offers extensive storage options:

• SSD 2.5": Up to 9 dedicated 2.5" drive bays are included.
• Kapila mafy 3.5": Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Fametrahana Karatra Sary (GPU)

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Fametrahana ny Rafitra Fampangatsiahana

The chassis supports various fan and radiator configurations:

• Fanohanana:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Top: 3x 120mm or 3x 140mm
  • Rear: 1x120mm na 1x140mm
• Liquid Cooling Radiator Support:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • aoriana: 120mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Fitantanana tariby

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Lahatsary fametrahana

3. Torolàlana miasa

3.1 Takelaka fidirana/fidirana eo anoloana

Ny tontonana I/O eo anoloana dia manome fidirana mora amin'ireo seranana sy fanaraha-maso ilaina:

• Bokotra hery: To power on/off your system.
• Port USB 3.0 (x2): Ho an'ny fampifandraisana ireo fitaovana USB 3.0.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Microphone/Headphone Combo Jack: Ho an'ny fampidirana sy famoahana feo.
• D-RGB Mode Button: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB Color Button: Changes the color of the D-RGB lighting.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 D-RGB Lighting Control

The integrated D-RGB lighting can be controlled in two ways:

• Fanaraha-maso tanana: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Fampifanarahana ny motherboard: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Fikojakojana

Ny fikojakojana tsy tapaka dia manampy amin'ny fiantohana ny fahombiazana tsara indrindra sy ny faharetan'ny singa ao amin'ny PC-nao.

• Sivana vovoka: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Fanadiovana anatiny: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Fanadiovana ivelany: Fafao ny faritra ivelany amin'ny malefaka, damp lamba. Halaviro ny mpanadio na solvents.

5. Famahana olana

Ity fizarana ity dia miresaka momba ireo olana mahazatra mety hatrehinao amin'ny PC-nao.

5.1 Olana fahefana

• Tsy mandeha ny rafitra:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Verify the PSU switch is in the 'ON' position.
  • Check that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Tabataban'ny mpankafy na tsy fahatomombanan'ny fiasany

• Feon'ny mpankafy be loatra:
  • Check for dust buildup on fan blades and clean if necessary.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Fan tsy mihodina:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Famaritana

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Warranty sy fanohanana

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks webtranokala na mifandray amin'ny serivisy mpanjifany.

Antsipiriany ifandraisana:

• Webtranokala: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., No. 150, Jian 1st Rd., Zhonghe Dist. New Taipei City 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).