1. Fampidirana
Thank you for choosing the VLOXO Cordless Electric Scissors, Model AT001. This tool is designed for efficient cutting of various materials such as cardboard, leather, plastic mats, carpets, and felt. Please read this manual thoroughly before use to ensure safe and optimal operation.
Fonosana fonosana
- Cordless Electric Scissor Unit (1)
- TYPE-C Charge Cable (1)
- Boaty fitahirizana (1)
- User Manual (1)


2. Information momba ny fiarovana
Araho hatrany ireto fepetra fiarovana manaraka ireto mba hisorohana ny ratra na ny fahasimban'ny fitaovana.
- Keep hands and fingers away from the rotating blade during operation.
- Ensure the safety lock switch is engaged when the tool is not in use to prevent accidental activation.
- Do not use the tool for cutting fabric or for precision cuts, as it is not designed for these applications.
- Do not use the tool while it is charging.
- Store the tool in its storage case when not in use, out of reach of children.
- Manaova fitaovana fiarovana manokana, toy ny solomaso fiarovana, rehefa mampiasa ilay fitaovana.
- Do not attempt to cut materials thicker than 1/4 inch (6.35 mm).
- Keep the blade guard area clean to ensure proper sharpening and operation.


3. Fametrahana
Fametrahana ny bateria
- Locate the TYPE-C charging port on the tool.
- Connect the provided TYPE-C charge cable to the tool and a compatible USB power adapter (not included).
- Hazava ny jiron'ny famandrihana.
- Allow the tool to charge fully before first use. Charging time may vary.
- Tapaho ny charger rehefa feno.
Important: Do not operate the electric scissors while charging.
If the tool is not used for an extended period, charge it regularly to maintain battery health.

4. Torolàlana miasa
Activating the Tool
The VLOXO electric scissors feature a safety lock-off mechanism to prevent unintended activation.
- Press the Safety Lock Switch: With your thumb, press the safety lock switch located on the side of the handle.
- Tariho ny trigger (Pull the Trigger): While holding the safety lock switch, pull the main trigger with your index finger. The blade will begin to rotate.
- Famoahana hidin'ny fiarovana: Once the blade is rotating, you may release the safety lock switch. The tool will continue to operate as long as the trigger is pressed.
- Atsaharo ny fandidiana: Release the trigger to stop the blade.

Fitaovana fanapahana
The VLOXO electric scissors are suitable for cutting materials up to 1/4 inch (6.35 mm) thick, including:
- baoritra
- hoditra
- Plastic Mats
- karipetra
- Felts
Note: This tool is not recommended for cutting fabric or for applications requiring high precision.
- Ensure the material to be cut is placed on a stable, flat surface.
- Activate the tool as described above.
- Gently guide the rotating blade along the desired cutting line. Apply steady, even pressure.
- Allow the tool to do the work; do not force it through materials.
- After cutting, release the trigger and store the tool safely.


5. Fikojakojana
Fanamafisana ny lobolobo
The VLOXO electric scissors are equipped with an automatic sharpening system. This system ensures the octagonal blade remains sharp during use.
- To maintain optimal cutting performance, regularly inspect the area around the blade guard.
- Ensure this area is free from dust and debris.
- Clean by blowing out with compressed air or using a small brush.

Fanadiovana sy fitahirizana
- Before cleaning, ensure the tool is turned off and the safety lock is engaged.
- Use a dry cloth to wipe down the exterior of the tool.
- Remove any accumulated debris from the blade area using a brush or compressed air.
- Store the electric scissors in the provided storage case in a dry, cool place.
6. Famahana olana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy mandeha ny fitaovana. | Lany ny bateria. Tsy novahana ny hidin-trano fiarovana. | Aloavy feno ny batterie. Ensure both the safety lock switch and trigger are pressed simultaneously to start. |
| Cutting performance is poor. | Blade area is obstructed. Ny fitaovana dia matevina loatra. | Clean debris from around the blade guard. Do not attempt to cut materials exceeding 1/4 inch thickness. |
| Mijanona ny fitaovana mandritra ny fandidiana. | Kety ny bateria. Navitrika ny fiarovana be loatra. | Avereno ny bateria. Reduce pressure or cut thinner materials. Allow tool to cool if overheated. |
7. Famaritana
| endri-javatra | antsipirihany |
|---|---|
| Laharana modely | AT001 |
| Marika | VLOXO |
| Battery Voltage | 4.2V |
| Haingana manapaka | 240 RPM |
| Fahaizana manapaka | 1/4 mirefy (6.35 mm) |
| Fitaovana Blade | High Speed Tool Steel |
| Ny refin'ny vokatra | 8.6" L x 1.9" W |
| Lanja entana | 14.9 ounces (eo ho eo amin'ny 422g) |
| Mitantana fitaovana | plastika |
| Orientation tanana | Ambidextrous |
| Karazana bateria | Metaly Lithium (tafiditra) |
8. Warranty sy fanohanana
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VLOXO website.
Tehirizo ny tapakila fividiananao ho porofon'ny fividianana ho an'ny fitakiana fiantohana.