BOYA BY-M1S Lavalier Microphone User Manual

1. Fampidirana

The BOYA BY-M1S is a professional omnidirectional lavalier condenser microphone designed for high-quality audio recording. It is compatible with a wide range of devices, including smartphones, DSLR cameras, camcorders, audio recorders, and personal computers. This manual provides detailed instructions for setting up, operating, and maintaining your BY-M1S microphone.

Figure 1: BOYA BY-M1S Lavalier Microphone

2. Toetran'ny vokatra

Omnidirectional Capsule: Captures broadcast-quality sound from a 360-degree range.
Plug and Play: No batteries or drivers required for most smartphone applications.
Long Cable: Features a 6-meter (20-foot) cable for extended reach.
Wide Compatibility: Supports smartphones, DSLR cameras, camcorders, audio recorders, tablets, and laptops.
Device Mode Switch: Easily switch between "Smartphone" and "Camera" modes.
Ahitana Accessories: Comes with a metal clip for secure attachment and a foam windscreen to reduce wind noise.

BOYA BY-M1S Microphone Components — Figure 2: Key components of the BY-M1S microphone, including the omnidirectional mic capsule, camera/smartphone switch, clothing clip, and 3.5mm connector.

3. Ny votoatin'ny fonosana

The BOYA BY-M1S package includes the following items:

BY-M1S Lavalier Microphone
Lapel Clip
Kitapom-baravarankely
Carrying Pouch (may vary by region)

4. Torolàlana fananganana

4.1 Fametrahana ny mikrôfôna

Attach the metal clip to the microphone body.
Securely clip the microphone to your clothing, approximately 15-20 cm (6-8 inches) from your mouth, for optimal sound capture.
Place the foam windscreen over the microphone capsule to reduce plosives and wind noise.

Lavalier Microphone with Clip — Figure 3: Microphone with lapel clip attached.

4.2 Mampifandray amin'ny fitaovana

The BY-M1S features a 3.5mm TRRS connector for broad compatibility.

Ho an'ny Smartphone/Tablets:
Plug the 3.5mm connector directly into your device's headphone/microphone jack. Ensure the switch on the microphone's control module is set to "Smartphone" mode. For iOS devices without a 3.5mm jack, a 3.5mm to Lightning adapter (not included) is required.
For DSLR Cameras/Camcorders/Audio Recorders/PCs:
Plug the 3.5mm connector into the microphone input jack of your device. Set the switch on the microphone's control module to "Camera" mode. For PCs with separate headphone and microphone jacks, you may need a 3.5mm TRRS to TRS adapter (not included).

BOYA BY-M1S Plug and Play — Figure 4: The BY-M1S microphone showing its 3.5mm connector and control module with the Camera/Smartphone switch.

5. Torolàlana miasa

5.1 Fomba Fifantenana

The control module on the microphone cable features a switch to select the appropriate operating mode:

Smartphone Mode: Use this setting when connecting to smartphones, tablets, or other devices that use a TRRS input.
Fomba fakan-tsary: Use this setting when connecting to DSLR cameras, camcorders, audio recorders, or other devices that use a TRS input.

Always ensure the switch is set to the correct mode for your recording device to prevent audio issues.

5.2 Recording Tips

Fametrahana mikrofona: For clear audio, position the microphone approximately 6-8 inches (15-20 cm) from the sound source.
Tontolo iainana: Record in a quiet environment to minimize background noise. The omnidirectional pattern picks up sound from all directions, including ambient noise.
Fitantanana tariby: Use the included cable tie to manage the extra-long cable and prevent tangles or accidental disconnections.
Fanaraha-maso: If your recording device allows, monitor your audio with headphones during recording to ensure optimal sound levels and quality.

6. Fikojakojana

Fanadiovana: Use a soft, dry cloth to clean the microphone body and cable. Do not use liquid cleaners or solvents.
fitahirizana: Store the microphone in its carrying pouch when not in use to protect it from dust and physical damage. Avoid extreme temperatures and humidity.
Cable Care: Do not sharply bend or pull the cable. Coil it loosely for storage.

7. Famahana olana

OLANA	Antony mety hitranga	vahaolana
Tsy misy feo na feo ambany.	Incorrect mode selected (Smartphone/Camera). Microphone not fully plugged in. Ambany loatra ny feon'ny fitaovana. Incorrect input selected on device.	Ensure the switch is set to the correct mode for your device. Firmly plug the 3.5mm connector into the device's audio jack. Increase the recording volume on your device. Select the external microphone as the audio input source in your device settings.
Poor audio quality (e.g., muffled, distorted).	Microphone too far or too close. Wind noise or plosives. High background noise.	Adjust microphone placement to 6-8 inches from the sound source. Hamarino tsara fa napetraka tsara ny fitaratra anoloana vita amin'ny "foam". Raketo ao anaty toerana mangina kokoa.
Microphone not recognized by iOS device.	Missing Lightning adapter.	An official Apple 3.5mm to Lightning adapter is required for newer iOS devices without a 3.5mm jack.

8. Famaritana

famaritana	antsipirihany
Pattern Pattern	Omnidirectional
Famaliana matetika	18 KHz
Audio Sensitivity	30 desibela
Famaritana fanamafisam-peo	78 dB
Impedance	1000 ohm
Ny halavan'ny tariby	6 metatra (20 feet)
Karazana mpampitohy	3.5 mm TRRS Jack
Loharanon-kery	Battery Powered (no internal battery, powered by device in smartphone mode, or external battery for camera mode if applicable)
Lanja entana	68g ny
refy (L x W x H)	12 x 6 x 15 Centimeters (Product Dimensions)

9. Warranty sy fanohanana

BOYA provides a antoka iray taona for the BY-M1S microphone. This warranty covers manufacturing defects and ensures product quality.

For technical support, warranty claims, or any questions regarding your BOYA BY-M1S microphone, please contact BOYA customer service through their official website or the retailer where the product was purchased. Please have your purchase receipt and product model number (BY-M1S) available when contacting support.

BOYA BY-M1S